About Mass Change Actions in MPMLink
Use the 
Perform mass change action to modify the following multiple entities associated with the objects in a single action:
Perform mass change action to modify the following multiple entities associated with the objects in a single action:• Resources — Associated with standard control characteristics and operations
• Documents — Associated with standard control characteristics, operations, process plans, sequences, and parts
For example, the same resource is inserted, replaced, or removed across 10's, 100's, or even 1000's of operations. The Perform mass change action is typically used in conjunction with a change notice as part of the work conducted during the authoring of a change task. This action is available on the Resulting Objects table of a change task information page, depending on the context.
Perform mass change action is typically used in conjunction with a change notice as part of the work conducted during the authoring of a change task. This action is available on the Resulting Objects table of a change task information page, depending on the context.For more information, see the following topics:
Defining and Previewing Mass Change Actions
The general process for using the Perform mass change action is as follows:
Perform mass change action is as follows:1. According to your business requirements, select standard control characteristics, operations, process plans, sequences, and parts
2. In the Resulting Objects table of a change task information page, click Perform mass change.
Perform mass change.3. The Perform Mass Change dialog box opens.
4. From the Select an operation list, select the appropriate option according to your business requirements.
5. Enter the appropriate information and click Finish. The Perform Mass Change dialog box closes, and the process is complete.
The detailed processes are documented in the following topics:
 | The action is also available for parts. For more information, see the following topics: |