compress_output_files

yes

no [default]

Controls whether to compress object files to store them. Compressed files are slower to read and write, one-half to one-third the size, and fully compatible across systems. When set to "yes," stores object files in compressed format. When set to "no," object files are not compressed.

disable_search_path_check

no [default]

yes

Controls whether the search path is checked for name conflicts when creating, renaming, or copying models.

When set to "yes," disables the check of the search path for a naming conflict when a new file is created. This can speed up file creation by postponing the search path check (which includes the entire commonspace) until an upload is performed.

dm_auto_open_zip

yes [default]

no

Defines how Creo Parametric handles zip files.

If set to "yes", then Creo Parametric opens the zip file and attempts to retrieve objects in the zip file. If the zip file contains more than one file (for example, in the case of assemblies), Creo Parametric first attempts to open an object in the zip file that has the same name as the zip file itself. If it finds one, it opens it. If not, it displays the contents of the zip file in the File > Open window.

If set to "No", Creo Parametric treats a zip file like a directory, and displays the contents of the zip file in the File > Open window, allowing the user to pick the file from the zip that he or she wants to retrieve into session.

dm_cache_limit

Integer [default = 0]

Sets the size (in MB) of the cache allocated to the combination of all registered severs and their workspaces on the client hard disk.

Recommendation: If possible, set the cache size large enough to accommodate the largest anticipated data set (the downloaded content and the locally modified content prior to upload should be counted separately). A good rule of thumb is 80% of the remaining free space on the disk where Wildfire cache is located.

dm_checkout_on_the_fly

checkout [default]

continue

If set to the default value "checkout," the default action for the Conflicts("checkout-on-the-fly") window is “Check Out Now.”

If set to "continue," the default action for the Conflicts window is “Continue.”

dm_hide_virtual_default_ws

No (default)

Yes

Controls whether to display or hide virtual workspaces in the Server Management utility.

dm_http_compression_level

Integer, from 0 (no compression) to 9 (maximum compression)

[default = 0]

Sets the level of compression for data upload and download.

Although compression speeds up transfer over the network, it uses server CPU and client CPU to perform the compress and decompress operations. In a local area network, where network transfers are rapid, compressing and decompressing data can result in lesser throughput. On a wide area network with lower bandwidth compression can lead to higher throughput. Since this is set per client, PTC recommends that clients in a LAN use a value of 0 (the default) and clients in a WAN use a value of 2 or 3.

For older Creo Parametric versions, the following approximate guidelines apply:

If client download bandwidth < 3 Mbps, enable dm_http_compression_level (at a value of 3).

If client download bandwidth > 3 Mbps, unset dm_http_compression_level as uncompressed response read times are faster.

As of Wildfire 2.0 M260 and Wildfire 3.0 M090, the following approximate guidelines apply:

If client download bandwidth < 20 Mbps, enable dm_http_compression_level (at a value of 3).

If client download bandwidth > 20 Mbps, set dm_http_compression_level to 0 (uncompressed), so that response read times are faster.

dm_network_request_size

integer >0

[default = 8000000]

Determines the maximum size, in bytes, of an HTTP upload request when uploading content files to Windchill.

The default of 8000000 is likely to ensure that each file is uploaded through a separate http request with minimal process memory consumption overhead.

A small value (say 8000) would mean many small HTTP requests to the method server containing the model files which may add overhead, but because the local Wildfire file buffers are filled quickly, the upload starts sooner.

A much larger value (say 1600000000) may allow the uploading of the entire data set in a single HTTP request, but it could take a while for the client to write the files from local disk to its internal buffer before streaming the content to the server. In addition, because of apparent size limitations of the Microsoft HTTP API you may experience random upload failures with very large file size data sets in Windows. In addition, working with large datasets has been known to cause Internet Explorer to run out of memory.

dm_network_retries

integer >0

[default = 10]

Sets the number of times Creo Parametric attempts to connect to a Windchill server before the connection is considered broken.

Recommended setting: default

dm_network_threads

integer >0

[default = 6]

Sets the number of concurrent threads Creo Parametric uses for uploading and downloading data to and from a Windchill server.

The recommended setting depends on the network bandwidth. It is suggested to start at 4 for a WAN and increase the value as per the per thread download bandwidth limit. However, in most cases, increasing the number of threads in a LAN environment does not improve performance, as the disk then becomes the bottleneck. Even in a WAN environment, settings greater than the default are unlikely to improve throughput significantly.

dm_offline_after_event

yes [default]

no

Allows you to choose to work offline after a loss of the server connection. Staying online ("no") continues to retry server operations.

dm_offline_options_activated

yes [default]

no

If set to yes, the options to synchronize, download, and upload workspace data are checked in the Synchronize Workspaces window.

If set to no, download and upload check boxes are unchecked by default for going online.

dm_overwrite_contents_on_ update

no [default]

yes

Specifies behavior during Update action.

If set to "no," does not overwrite the locally modified contents for out-of-date objects, but updates their metadata only

If set to "yes," overwrites the locally modified or out-of-date objects with the ones on the server in addition to updating their metadata.

dm_remember_server

yes [default]

no

If this option is set to "yes," the last primary server/workspace of a Creo Parametric session is set automatically for the next Creo Parametric session.

dm_save_as_attachment

yes [default]

no

Controls the default option for Creo Parametric Save a Copy when models are saved as in non-Creo Parametric format.

If set to "yes," the model is by default saved as a secondary content attachment to the original CAD document.

If set to "no," the model is by default saved as a (primary) CAD document.

dm_search_primary_server

yes [default]

no

If this option is set to "yes," during retrieval, the system searches the primary server for dependencies not found in the workspace

dm_secondary_upload

automatic [default] explicit

Defines the behavior of saving to an additional server (See also dm_upload_objects).

If this option is set to "explicit," the Creo Parametric File > Backup command writes data to the cache. The user must then explicitly send that data to the server (using either using either the Upload or Check In commands invoked from the corresponding workspace). If this option is set to "automatic," File > Backup in Creo Parametric also uploads the Creo Parametric files to the server.

dm_upload_objects

explicit [default]

automatic

Defines the behavior of the Save command in Creo Parametric.

If this option is set to "explicit," the Creo Parametric File > Save command writes data to the cache. The user must then explicitly send that data to the server (using either File > Save and Upload or File > Checkin. If this option is set to "automatic," File > Save in Creo Parametric also uploads the Creo Parametric files to the server.

enable_configurable_assembly

Yes

No [default]

If set to yes, this option enables the creation of configurable assemblies.

enable_show_changes

no [default]

yes

If set to Yes, enables the View Changes window, to allow a user to accept or reject the Windchill editing instructions when attempting to open an annotated CAD structure into Creo Parametric session.

let_proe_rename_pdm_ objects

no [default]

yes

Determines whether an object retrieved from a PDM database can be renamed in a Creo Parametric session

An object rename in Creo Parametric is seen only by parents in session. The object is seen as a new object when saved to the workspace.

This option can be used to replace a standard sub-assembly with a copy of itself with a unique name.

open_simplified_rep_by_ default

no (default)

yes

<name_of_ simplified_rep>

Specifies whether to prompt user to select a simplified representation when opening a Creo Parametric file.

If set to "yes," user is prompted to open a simplified representation when opening a Creo Parametric file.

If set to the name of a simplified representation, the system opens the simplified representation without prompting the user.

This option can be useful for using internal simplified reps on small to medium-sized datasets. If set to "yes," the user sees a pop-up listing the simplified reps available in an assembly, for example, when clicking its hyperlink in the embedded browser. Choosing one of the simplified reps allows the user to add to the workspace and download only the models required for the corresponding simplified reps.

regenerate_read_only_ objects

yes (default)

no

Specifies whether read-only objects (objects not checked out) are regenerated.

Set to "yes," it specifies that read-only parts with relationships to an explicitly modified assembly are modified implicitly upon regeneration of the assembly. (Explicit changes to a checked-in object cause the Conflicts window to appear).

By setting to "no," you may avoid having read-only workspace objects marked as modified. This, in turn, can reduce the number of files required for the checkout of an associated assembly

retrieve_data_sharing_ref_ parts

yes

no [default]

Controls automatic reference parts retrieval for dependent data sharing features.

When set to "no," prevents download/opening of components that are not immediately needed

save_model_display

wireframe

shading_low

shading_high

shading_lod

Sets the quality of graphics that are shown on the Windchill information page.

Setting this option to shading_lod creates the best images, but requires larger Creo Parametric file sizes to store the additional graphical information.

save_objects

changed_and_ specified [default]

all

changed

changed_and_ updated

Determines when an object and its dependent objects (such as a part used in an assembly) are stored.

The recommended value in a PDM environment is "changed" (to avoid unnecessarily iterating the top-level object if it was not modified in session).

search_path

<directory paths by full path name>

Specifies list of directories to search (in order) for object/file retrieval. These directories, the working directory, and directories in search.pro file (refer to search_path_file) are Creo Parametric's search path. Use full path name to avoid problems. It is best to use the minimum number of search paths to a minimum because a large number of search paths increases retrieval time.

topobus_enable

no [default]

yes

Allows direct import of certain non-native files into Creo Parametric session.

web_browser_homepage

string value

Sets the location of Creo Parametric browser homepage.

dm_custom_checkin_prompt

no [default]

yes

Controls the visibility of the content dialog box.

The Custom Check In dialog box opens if you have set the dm_custom_checkin_prompt configuration option to “yes”.