|
Element
|
Type
|
Description
|
|---|---|---|
|
base_prefix
|
Property Key Component
|
The prefix com.ptc.windchill.associativity.reconciliation.addusage
is mandatory and constant. Only properties with this prefix are considered for the add template configurations.
|
|
upstream_view
|
Property Key Component
|
The internal name of the view, which forms the upstream view context for equivalence link. For example: design.
This key needs a corresponding downstream_view configuration as well. The key is optional.
|
|
downstream_view
|
Property Key Component
|
The internal name of the view, which forms the downstream view context for equivalence link. For example: manufacturing.
This key needs a corresponding upstream_view configuration as well. The key is optional.
|
|
type_internal_name
|
Property Key Component
|
The internal name of the type that is valid for transformation. The key should not contain the hierarchy name. For example: com.ptc.ElectricalPart.
This key supports inheritance. So, if defined for a super type, the associated configurations are applicable for sub-types, unless explicitly defined.
The key is mandatory.
|
|
Element
|
Type
|
Description
|
|---|---|---|
|
transformoption
|
Properties
|
Describes how the given type should be transformed in a downstream structure. The default valid supported values are addSame, newBranch, and newPart. These values are equivalent to the interface actions Paste, Paste as New Branch, and Paste as New Part. For example, transformOption=addSame.
If a downstream structure exists, the service internally prioritizes the addExisting option. If not specified, the default value is addSame.
The value is case sensitive.
|
|
structureoption
|
Properties
|
Describes the action to be performed on the children of the node which is being transformed. You can carry forward the children, transform the children recursively, or not carry forward the children.
Valid values are 0, 1, and 2. For example, structureOption=0. The default value is 0. The values are explained below:
• 0: Do not duplicate the children.
• 1: Duplicate the children but do not transform them.
• 2: Duplicate the children and recursively transform them.
In some cases, the value maybe not applicable. For example, if transformOption is addSame, then structureOption is not applicable.
|
|
attribute.<internal_name>
|
Properties
|
Specifies the internal name of the attribute on the type which is used to control transformation validity. For example, attribute.lineNumber.value=20,attribute.phantom=true. The supported attribute types are Global, Local, Alias, and Calculated.
This is a multi-valued property and allows specifying multiple attributes. This is optional and if not provided, transformation is validated only on the type. Out of the box, the system performs string comparison.
|
|
targetType
|
Properties
|
Identifies the downstream type under which valid upstream parts can be consumed. The path containing the given type in hierarchy is marked as valid. You need to specify the internal name of the type as the value and not the hierarchical name of the type. For example, targetType=com.ptc.ElectricalPart
It is optional. If not specified, the nearest common equivalence context is used as the default target.
|
|
targetAttribute.<internal_name>
|
Properties
|
Specifies the target node where the upstream node should be pasted or transformed. It contains the prefix targetAttribute. For example, targetAttribute.lineNumber.value=20,targetAttribute.phantom=true.
It is optional. If not provided, the system uses targetType. It stops at the first matching instance in the path hierarchy, navigating from the leaf to the root.
|
|
doAndValidationForAttr
|
Properties
|
Specifies whether to perform an AND or OR operation to find a match when multiple attributes are defined for matching on the source or target.
Default is true.
|
|
forceNewDownstreamCreation
|
Properties
|
Specifies if a new downstream branch or part should be created when a downstream branch already exists. For example, when using transformOption=newPart.
Default value is false.
|
|
continueNavigationForReusedChildren
|
Properties
|
Specifies whether you want to continue navigating the structure if, as part of transformation, the children were reused and carried forward as is to the downstream branch. It is useful when you transform parent using the addSame action, but in the structure, you use the newBranch or newPart action for a node. It may impact the performance.
Default value is false.
|
|
useProcessPlanLogicEnabled
|
Properties
|
Specifies that if a downstream structure does not exist, search for a process-plan created for the part and use the downstream structure associated with the upstream node given in the process-plan.
|