Fundamentals > Working with Windchill Objects > Visualization Overview > Server-Side Publishing of ECAD Viewables
Server-Side Publishing of ECAD Viewables
Windchill Visualization Services supports server-side publishing for the following tools:
Tool
File Type/Adapter
Shape Type
ECAD
CADIF (.paf, .cdf)
DSN (.dsn, .cct)
EDIF (.eds, .edf, .edi)
GenCAD (.cad)
GERBER (.gbr, .pho, .art)
IDF (.bdf, .emn, .emp, .idf)
IFF (.iff)
IPC-2581 (.cvg, .xml)
ODB++ (.tar, .Z, .tgz, .gz, matrix)
ECADNEUTRAL
Cadence
Cadence Team Design Option-Allegro PCB (.brd)
ALLEGRO
Cadence Allegro PCB (.brd,.bri,.dra,.mdd)
ALLEGRO
Cadence Allegro Package Designer- APD (.mcm, .sip)
APD
Cadence DesignEntryCIS-OrCAD (.dsn)
ORCADCAPTURE
Cadence DesignEntryHDL- Concept (.cpm)
CONCEPT
Cadence Team Design Option - Concept (.cpm)
CONCEPT
Cadence System Capture
CONCEPT
Zuken
Zuken Board Designer (.pcb)
BOARDDESIGNER
Zuken System Designer (.cir)
SYSTEMDESIGNER
Zuken Design Gateway (.cir)
DESIGNGATEWAY
Zuken Design Force (.dsgn)
DESIGNFORCE
Siemens EDA
Siemens EDA Expedition PCB (.prj)
EXPEDITION
Siemens EDA PADS Layout (.pcb)
PADSLAYOUT
Siemens EDA DxDesigner (.prj)
DXDESIGNER
Siemens EDA PADS Professional
EXPEDITION
Altium
Altium schematic (.schDoc)
ALTIUMSCH
* 
Each sheet must be saved as an ASCII file.
For ECAD server side publishing, the following requirements must be met:
1. Save all primary content, including all design data and related data required to open the design on a remote worker machine, as a single ZIP file.
2. Add the file name of the primary design item being published to the ECAD_DESIGN_ITEM attribute.
3. For ECAD neutral file format server-side publishing, add the neutral file name (with extensions) being published to the ECAD_NEUTRAL_FORMAT_FILE attribute.
For ECAD data that is eligible for server-side publishing, this enables the following:
Creating a New Representation
Republishing jobs
* 
File synchronization is not supported by ECAD publishing.
The alternate file formats are not supported by ECAD publishing.
Server-side publishing requires a worker to be configured. For more information, see “Installing and Configuring the Adapters” in the Creo View ECAD Adapters Installation and Configuration Guide in the Creo View Help Center or as a PDF on the Reference Documents site.
Isto foi útil?