Overview of Generate Downstream Structure Action
When working on large engineering BOM structures, you can automate the process of generating a manufacturing BOM from a design BOM. The 
Generate Downstream Structure action, available in the middle pane tool bar of BOM Transformer, generates a downstream structure from an upstream structure using a customizable logic.
Generate Downstream Structure action, available in the middle pane tool bar of BOM Transformer, generates a downstream structure from an upstream structure using a customizable logic.The default logic transfers specific parts to the downstream structure and then restructures them according to the various embedded scenarios. You can configure this default logic using a set of properties or customize it completely through the delegate framework.
For more information on generating the downstream structure, see Generating a Downstream Structure and Use Cases: Generate Downstream Structure.
Best Practice
The following are some best practices and information that is helpful when you use the Generate Downstream Structure action:
Generate Downstream Structure action:• Use the Generate Downstream Structure action only once on a selected assembly.
Generate Downstream Structure action only once on a selected assembly.• For properties that involve mapping, specify unique values in mapping attributes. For example, <AddToProperty name="com.ptc.windchill.associativity.reconciliation.addusage.wt.part.WTPart" value="attributeMapping.rule1=attribute1:String1:attribute2:String2"/>.
• When this action is initiated on an assembly such as Axle Assembly, the application traverses the structure under Axle Assembly and generates a downstream structure for parts under the Axle Assembly.
• The selection in the downstream is irrelevant when this action is performed.
• Specifying a target type property in the associativity.properties.xconf file is prerequisite to using this action. The property file is located at Windchill/codebase/com/ptc/core/foundation/associativity.
For example:<AddToProperty name="com.ptc.windchill.associativity.reconciliation.addusage.wt.part.WTPartUsageLink" value="targetType=wt.part.WTPart"/>
• This action is disabled when you select one or more child parts in the upstream.
• You can create new attributes and use those attributes in properties defined for this action.
• This action supports global, local, and calculated attributes in Windchill. The Boolean, string, real number, integer attributes are also supported. However, the date attribute is not supported.