Frequently Used Autodesk Inventor Preferences (Autodesk Inventor)
This section contains some of the more frequently used preferences that can be set or modified depending on your Windchill role.
In addition to the preference category Workgroup Manager Client, Windchill and Windchill Workgroup Manager preferences can be set from other preference categories such as Operation, Visualization, and Workspaces.
* 
This section lists the most frequently used preferences, and not every preference that can be set using the Preference Management utility. For the complete list of preferences for your Windchill Workgroup Manager for Autodesk Inventor that can be managed from the Preference Management utility, refer to the Preference Management utility in Windchill. Online help is available for each preference from the Set Preference window.
The following tables list the most frequently used preferences in the preference categories Operation, Workgroup Manager Client, and Workspaces that can managed for Windchill Workgroup Manager for Autodesk Inventor.
Preferences Under Operation
The following table describes the most frequently used preferences that can be set or modified from the Operation category and subcategories.
Name
Contexts
Values
Operation > Auto Associate > Auto Associate Naming Parameter
Site
Organizations
Identifies the soft attribute in the CAD document that holds the name for parts during an auto associate operation like Auto Associate Part Search or New Part Creation.
Operation > Auto Associate > Auto Associate Numbering Parameter
Site
Organizations
Identifies the soft attribute in the CAD document that holds the number for parts during an auto associate operation like Auto Associate Part Search or New Part Creation.
Operation > Auto Associate > Auto Associate Truncate Name File Extension
Site
Organizations
Truncates the file extension (from the CAD filename) in the part name when the part is created.
Operation > Auto Associate > Auto Associate Truncate Number File Extension
Site
Organizations
Truncates the file extension (from the CAD filename) in the part number when the part is created.
Operation > Auto Associate > Create Alternate Link On Check In
Site
Organizations
Products
Projects
Libraries
Allows a link of the next available type to be created if the part already has an owner link.
Operation > Auto Associate > Create Associate New Part
Site
Organizations
Products
Projects
Libraries
Specifies whether a new part should be created if a matching part is not found by an auto-associate operation.
Operation > Auto Associate > Disallow Product Structure Links by Document Sub-types
Site
Organizations
Lists the CAD document sub-types which cannot create associations that contribute to part structure.
Operation > Auto Associate > Disallow Product Structure Links by Document Types
Site
Organizations
Lists the CAD document types which cannot create associations that contribute to part structure.
Operation > Auto Associate > Disallow Structure CAD Document Sub-types
Site
Organizations
Lists the CAD document sub-types which cannot create owner association.
Operation > Auto Associate > Disallow Structure CAD Document Types
Site
Organizations
Lists the CAD document types which cannot create owner association.
Operation > Auto Associate > Disallow Structure Model Item Types > Force Autonumbered Part Creation
Site
Organizations
Allows an auto-associate operation to create an auto-numbered part after check in.
Operation > Auto Associate > Disallow Structure Model Item Types > Set Revision for Part
Site
Organizations
Sets the revision of a part to match the revision of the CAD document during an auto-associate operation.
Operation > Auto Associate > Disallow Structure Model Item Types > Store New Parts with CAD Documents
Site
Organizations
Specifies the location of newly-created parts to be the same as the location of their associated CAD documents.
Operation > CAD Data Management > Content Handling > Download [preference name]
Site
Organizations
Sets the download preference for the selected content category.
Operation > CAD Data Management > Content Handling > Mark Out Of Date [preference name]
Site
Organizations
Sets an out-of-date mark for the selected content category.
Operation > CAD Data Management > Content Handling > Set Default Subtype
Site
Organizations
Set the default subtype for the selected content category.
Operation > Edit Attributes > Collector [preference name]
Site
Organizations
Products
Projects
Libraries
User
Allows you to manage the collected documents and their related objects during an Edit Attributes operation.
Operation > Remove from Workspace > Collector [preference name]
Site
Organizations
Products
Projects
Libraries
User
Allows you to manage the collected documents and their related objects during an Remove from Workspace operation.
Operation > New CAD Document > Synchronize CAD File Name with CAD Document Number
Site
Organizations
Products
Projects
Libraries
User
Specifies whether the file name for a new CAD document or design context should be set to the same value as its number.
Operation > Rename > Collector
Site
Organizations
Products
Projects
Libraries
User
Allows you to manage the collected documents and their related objects during a Rename operation.
Operation > Set State > Collector [preference name]
Site
Organizations
Products
Projects
Libraries
User
Allows you to manage the collected documents and their related objects during a Set State operation.
Operation > Undo Check Out > Collector [preference name]
Site
Organizations
Products
Projects
Libraries
User
Allows you to manage the collected documents and their related objects during an Undo Check Out operation.
Operation > Update Operation > Update [preference name]
Site
Organizations
Products
Projects
Libraries
User
Contains the Windchill Workgroup Manager preferences for an Update operation.
Operation > Update Operation > Update > Add Primary Contents to Workspace
Site
Organizations
Products
Projects
Libraries
User
Controls the default behavior of whether content should be added to the workspace as a link or the actual file.
Operation > Update Operation > Upload [preference name]
Site
Organizations
Products
Projects
Libraries
User
Contains the Windchill Workgroup Manager preferences for an Upload operation.
Operation > Upload Operation > Upload Collector [preference name]
Site
Organizations
Products
Projects
Libraries
User
Contains the Windchill Workgroup Manager preferences for an Upload Collector operation.
Preferences Under Workgroup Manager Client
The following table describes the most frequently used preferences that can be set or modified from the Workgroup Manager Client category and subcategories.
Name
Context
Description
Workgroup Manager Client > Define Library Used by Application
Site
Organizations
Products
Projects
Libraries
Indicates a library in which library components are automatically added by Autodesk Inventor
Workgroup Manager Client > Disable Check out on the fly
Site
Organizations
Products
Projects
Libraries
Controls the display of the Conflicts (for Check out on the fly) window upon execution of Save action and resolves the checkout conflict with one of the following options:
Check-out — Disable the Conflicts (for Check out on the fly) window and checkout the document.
Revise and Check out — Disable the Conflicts (for Check out on the fly) window; revise and checkout the document.
Continue — Disable the Conflicts (for Check out on the fly) window and continue to save the document without a checkout.
* 
Documents that are not explicitly checked out are not eligible for a check in.
No (default) — Enables the display of the Conflicts (for Check out on the fly) window.
Workgroup Manager Client > Enable Replace in CAD Session on Refresh
Site
Organizations
Controls whether to enable the "Replace in CAD Session" feature on refresh.
Workgroup Manager Client > Independently Modify Instances
Site
Organizations
When set to No, all members of a non-Creo family table are simultaneously checked out. When set to Yes individual checkout is allowed.
Workgroup Manager Client > Mapping System Attributes and File Properties > CAD Document Iteration System Attribute
Site
Organizations
Identifies the name of the property in the CAD tool that shows the CAD document's iteration.
Workgroup Manager Client > Mapping System Attributes and File Properties > CAD Document Life Cycle State System Attribute
Site
Organizations
Identifies the name of the property in the CAD tool that shows the life cycle state of the CAD document.
Workgroup Manager Client > Mapping System Attributes and File Properties > CAD Document Life Cycle System Attribute
Site
Organizations
Identifies the name of the property in the CAD tool that shows the life cycle of the CAD document.
Workgroup Manager Client > Mapping System Attributes and File Properties > CAD Document Name System Attribute
Site
Organizations
Identifies the name of the property in the CAD tool that shows the CAD document's name.
Workgroup Manager Client > Mapping System Attributes and File Properties > CAD Document Number System Attribute
Site
Organizations
Identifies the name of the property in the CAD tool that shows the CAD document's number.
Workgroup Manager Client > Mapping System Attributes and File Properties > Created By Attribute
Site
Organizations
The default name is set to a blank value.
Setting the property name to PTC_WM_CREATED_BY creates the property that displays the name of the user that created the CAD document.
Workgroup Manager Client > Mapping System Attributes and File Properties > Created On Attribute
Site
Organizations
The default name is set to a blank value.
Setting the property name to PTC_WM_CREATED_ON creates the property that displays the date and time when the CAD document was created.
* 
The Date.Type.Parameter.Format preference in the wgmclient.ini file controls the date and time string.
Workgroup Manager Client > Mapping System Attributes and File Properties > Modified By Attribute
Site
Organizations
The default name is set to a blank value.
Setting the property name to PTC_WM_MODIFIED_BY creates the property that displays the name of the user that last modified the CAD document.
Workgroup Manager Client > Mapping System Attributes and File Properties > Modified On Attribute
Site
Organizations
The default name is set to a blank value.
Setting the property name to PTC_WM_MODIFIED_ON creates the property that displays the date and time when the CAD document was last modified.
* 
The Date.Type.Parameter.Format preference in the wgmclient.ini file controls the date and time string.
Workgroup Manager Client > Mapping System Attributes and File Properties > Organization ID System Attribute
Site
Organizations
Identifies the name of the property in the CAD tool that shows the CAD document's organization ID.
Workgroup Manager Client > Mapping System Attributes and File Properties > Part Name System Attribute
Site
Organizations
Identifies the name of the property in the CAD tool that shows the CAD document's owner-associated part name.
Workgroup Manager Client > Mapping System Attributes and File Properties > Part Number System Attribute
Site
Organizations
Identifies the name of the property in the CAD tool that shows the CAD document's owner-associated part number.
Workgroup Manager Client > Mapping System Attributes and File Properties > Revision System Attribute
Site
Organizations
Identifies the name of the property in the CAD tool that shows the CAD document's revision.
Workgroup Manager Client > Open Collector > Include Dependent CAD/Dynamic Documents
Site
Organizations
Products
Projects
Libraries
User
Specifies which dependent CAD documents for the collected CAD documents are added to the collection by default upon opening.
Workgroup Manager Client > Open Collector > Include Related Drawings
Site
Organizations
Products
Projects
Libraries
User
Allows the user to specify which drawings associated to the collected CAD documents will be added to the collection by default upon opening.
Workgroup Manager Client > Synchronize Number and File Name
Site
Organizations
Allows the file name and number to be the same.
Workgroup Manager Client > Undo Checkout Overwrite Local Content
Site
Organizations
Products
Projects
Libraries
User
Specifies whether the model content is overwritten in the cache by default during Undo Checkout.
Workgroup Manager Client > Update Overwrite Local Content
Site
Organizations
Products
Projects
Libraries
User
Specifies whether the model content is overwritten in the cache by default during Update from Windchill Workgroup Manager.
Workgroup Manager Client > Upload After Native Save
Site
Organizations
Products
Projects
Libraries
User
Specifies whether the model is uploaded after a native Save action in Autodesk Inventor (i.e., File > Save).
Workgroup Manager Client > Upload CAD/Dynamic Document and Attachment Filter
Site
Organizations
Products
Projects
Libraries
User
Allows configuring the content that is uploaded as additional content of a model.
Workgroup Manager Client > Upload Related Drawings
Site
Organizations
Products
Projects
Libraries
User
Native upload or auto check in of CAD documents uploads or checks in associated drawings.
Workgroup Manager Client > Mapping Custom System Attributes and File Properties
Site
Specifies the additional attributes from the objects related to the CAD document that are shown as parameters or properties in the CAD tool
Preferences Under Workspace
The following table describes the most frequently used preferences that can be set or modified from the Workspace category and subcategories.
Name
Context
Values
Workspace > Add to Workspace and Check Out > Add Primary Contents to Workspace
Site
Organizations
User
Controls the default behavior of whether content should be added to workspace as a link or the actual file.
Workspace > Add to Workspace and Check Out > Add to Workspace Collector [preference name]
Site
Organizations
User
Allows you to manage the collected documents and their related objects during an Add to Workspace operation.
Workspace > Add to Workspace and Check Out > Automatically lock objects added to workspace
Site
Organizations
User
Sets the workspace lock to automatically lock all objects that are not being checked out during Add to Workspace and Check Out operations.
Workspace > Add to Workspace and Check Out > Check Out Collector
Site
Organizations
User
Allows you to manage the collected documents and their related objects during a Check Out operation.
Workspace > Add to Workspace and Check Out > Open in Application
Site
Organizations
User
Controls the default behavior of whether initially-selected items should also be opened in Autodesk Inventor when Add to Workspace or Check Out is performed from the user interface.
Workspace > Add to Workspace and Check Out > Reuse Modified Workspace Content
Site
Organizations
User
Controls the default behavior of how content should be handled when there is already-modified content in the target Workspace cache.
Workspace > Add to Workspace and Check Out > Set Configuration for Add to Workspace
Site
Organizations
User
Controls the default configuration when a Add to Workspace action is performed.
Workspace > Add to Workspace and Check Out > Set Configuration for Check Out
Site
Organizations
User
Controls the default configuration when a Check Out action is performed.
Workspace > Add to Workspace and Check Out > Set for Check Out
Site
Organizations
User
Controls the default set of objects to be checked out.
Workspace > Add to Workspace and Check Out > Use Advanced Tab as Default
Site
Organizations
User
Setting this preference to Yes allows you to set the Advanced tab as the default in the Add to Workspace and Check Out actions.
Workspace > Export from Workspace > Collector [preference name]
Site
Organizations
User
Allows you to manage the collected objects and its dependent objects during Export from Workspace operation.
Revise Preferences
The following table describes the revise preferences.
Name
Context
Description
Revise > Collector > Collection Preferences Not Used in Quick User Interface
Site
Organizations
The Include Related CAD / Dynamic, Include Related Documents and Include Related Parts values are set by default.
Was this helpful?