PTC FlexPLM Fundamentals > Measurements > Working with the Measurement Editor > Measurement Editor Page Layout > Measurement Editor Page: Attribute Boxes
  
Measurement Editor Page: Attribute Boxes
This topic outlines the name and contents for the boxes found on each measurement editor page.
Details or Information Box
This box contains basic information about the measurement template, the grade rule template, or the product measurement set. Additional boxes might be included if attributes are created or defined for additional attribute types.
• On the Update Measurement Template page, this box is the Measurement Template Details box.
• On the Update Grade Rule Template page, this box is the Template Sizing and Grade Information box.
• On the Update Measurement Set page, this box is the Product Sizing and Grade Information box.
This box contains the following information:
Attribute
Description
Name
The name of the template. You can change the template name by entering a new name in this field.
* 
The system automatically numbers product measurement sets. While you can delete the automatically generated number from the name, this is not recommended.
Type
This field can be changed by selecting Change Type from the Actions list on the template View page.
Measurement Template (Appears in measurement set table only)
This field displays the measurement template used when the measurement set was created. This cannot be changed.
Grade Rules (Appears in measurement set table only)
This field displays the grade rules for the measurement set. You can select a new grade rule from the Grade Rules list.
Size Category (Appears in grade rule template only)
The size category that is associated to the grade rule template. This cannot be changed.
Full Size Range (Appears in grade rule template only)
The full size range that is associated to the grade rule template. This cannot be changed.
Unit of Measure
This field dictates the unit of measure for the POMs in the template. This cannot be changed.
Editor UOM
You can select a new editor unit of measure by selecting from the Editor UOM list. Changing the Editor UOM value converts the displayed values for the POMs or grade rules in the measurement template while you work in the measurement editor. It does not change the actual unit of measure for the POMs.
Image Box
The measurement images section allows you to view the image associated to the template or set. The section name varies depending on which template or set you are updating.
Page
Box Name
Update Measurement Template
Measurement Template Image
Update Grade Rule Template
Grade Template Image
Update Measurement Set
Measurement Set Image
* 
You must view the template or set to update the image. See Measurement and Grade Rule Template Images for details on updating a template or set image.