Alarm Events
General
Click the Alarm Events tile from the Operations subsection landing page. Or click Alarm Events from the Operations submenu.
The Alarm Events display shows a filterable report of alarm events that have occurred over time and offers administrators, line managers, plant managers, and process managers the ability to acknowledge or delete alarms.
Filtering
The events that are shown within the Alarm Events display are determined by the following filter selections located in the Advanced Filter panel:
• Equipment — Select one or more pieces of equipment to display waste events. At least one piece of equipment must be selected.
• Alarm Severity—(optional) Select one or more Alarm Severities form the dropdown.
• Alarm Status — (optional) Select one or more Alarm Status from the dropdown.
• Quick Time Picker—Select a time frame for which you want to display waste events from a list of predefined time frames or set a custom time frame.
• Start Time and End Time — When the custom option is selected in the Quick Time Picker, a start and end time must be designated. Selected time is rounded to the nearest hour.
• Filter – Execute the current filter settings.
• Reset – Clear all filter settings.
 | Applying a filter with no selections will display all alarm events for all times. |
Acknowledging
1. Search for and select the appropriate alarm.
2. Click Acknowledge. The Acknowledge Alarm popup will display with information regarding the alarm.
3. Click Acknowledge.