Waterfall Chart Widget (Themable)

Mashup Builder > Widgets > Standard Widgets > Waterfall Chart Widget (Themable)

Introduction

The Waterfall Chart widget displays a responsive waterfall chart in your mashup. The widget enables you to visualize cumulative change as values are added to or subtracted from an initial value.

Each increase or decrease can be colored to highlight a positive or a negative change when there is a single data series in your chart.

When you drag the Waterfall Chart widget to your workspace, it appears as shown below:

• The Waterfall Chart widget is available as a standard widget in the platform and as a web component that you can import from an SDK.

• The Waterfall Chart supports only a single data source. If you want to use data from multiple sources, you may merge the data in to a single infotable and use it in the chart.

Data Format

You must create an infotable with field definitions that represent the data structure for the chart. The infotable must include a field definition for the X and Y-axis values. Each infotable row represents a category on the X-axis and its corresponding Y-axis value. The following table lists the data format for an example infotable:

X Axis

Y Axis Value

Y Axis Value N

Y Axis

Field Definition

x:{name:'x',baseType:'STRING'}

Value1:{name:'Value1',baseType:'NUMBER'}

Value1:{name:'Value2',baseType:'NUMBER'}

{Selectable: True, baseType: 'BOOLEAN"}

{ShowTotal: False, baseType: 'BOOLEAN'}

Use

Defines the X-axis values for the chart bar or column. The data must have a STRING base type. Each row is displayed as a category on the X-axis. The defined name for this column is the option that you should select for the XAaxisField widget property.

Defines the Y-axis value and the legend label for the category.

Defines the Y-axis value and the legend label for each additional data series.

This is an optional field.

Waterfall Chart supports non selectable bars. This means you can hover over and focus on the bars in the chart but cannot select it.

You must create an additional column Selectable in the infotable data source. The values or bars are interactive and set to True by default. You may set the value to False to make the bar non selectable. The field is not case sensitive. The NonSelectableData property in the properties list controls whether the user can click to select the data on the chart. For more information, see the property table.

This is an optional field applicable in the case of single series data.

Defines whether an increase or decrease in the value is displayed as a stacked or overlapped bar over a full bar in the chart. The value is set to False by default. You may set the value to True to display the stacked or overlapped bars.

You must create an additional column ShowTotal in the infotable data source. The field is not case sensitive. The ShowTotal property in the properties list controls whether the bars appear stacked or overlapped. For more information, see the property table.

Base Type

STRING

NUMBER

BOOLEAN

Row Example

Game:'Cash In'—Where Cash In is the category name to show on the X-axis

Player1:100—The Y-axis value for the category

Player2: 100 — The Y-axis value for the second data series

For example, see the image for multi series data below.

For example, see the image for single series data below.

• The first and the last x axis values give the corresponding y axis values and are displayed as summary values in the chart.

• If the y axis value is empty in the infotable, it displays the current value as a regular full bar in the chart. If the y value is “0”, it displays an empty bar in the chart.

• Single Series Data:

The following image shows an example of single series data returned from an infotable with field definition for the y-axis:

The following image shows the Waterfall Chart widget with a sample single series data loaded in the mashup. The trend colors that are set using the UseTrendColors property highlight the increase and decrease of values. The bar for April is stacked and the bar for May is overlapped over full bars in the image.

• Multi Series Data:

The following image shows an example of multi series data returned from an infotable with field definition for the y-axis:

The following image shows the Waterfall Chart widget with a sample data loaded in the mashup.

Binding a Data Source

To bind the chart to a data source, perform the following steps:

1. On the Data panel, add a data service that returns an infotable with the correct data format for the widget.

Make sure that the service is triggered by an event at run time.

2. Bind the All Data property of the data service to the Data property of the chart.

3. Select the chart, then on the Properties panel, use the XAxisField property to select the infotable column to use for the X-axis.

By default, all the columns in the infotable are automatically displayed on the Y-axis chart. To select the data series manually:

a. Set the NumberOfSeries property to a fixed number.

b. Select the infotable column for each data series using the DataField1..N properties.

4. Click Save, then View Mashup.

The data is now displayed on the chart. Each additional column in the bound infotable is displayed as a data series. After you bind a data source, consider adding labels using the Label, XAxisLabel, and YAxisLabel properties.

You can also configure the widget using additional properties. For example:

• To show ruler lines, enable the ShowXAxisRuler and ShowYAxisRuler properties.

• To show trend colors for an increase or decrease in the value, enable the UseTrendColors property.

• To enable zoom along the vertical or horizontal axis, enable the HorizonalZoom and the VerticalZoom properties.

• To apply state formatting to the chart, use the DataSeriesStyle property. For more information, see Example: Applying State Formatting to Charts.

For more information about the available configuration options, refer to the properties table below.

To update the chart data automatically at run time, create an Auto Refresh function and bind it to the data service that returns the chart data. For more information, see Auto Refresh.

Adding a Secondary Axis

You can add a secondary Y axis in the chart using the ShowSecondYAxis property. The following image shows a waterfall chart with a secondary Y axis.

The following table lists properties that you can use to enable and configure the secondary Y-axis:

Property Name	Description	Base Type	Default Value	Bindable? (Y/N)	Localizable? (Y/N)
ShowSecondYAxis	Adds a secondary Y-axis to the chart. When you select this property, SecondYAxisFormat, SecondYAxisLabel, and SecondYAxisLabelAlignment properties appear on the list.	BOOLEAN	False	Y	N
SecondYAxisLabel	Specifies the text label for the secondary Y-axis.	STRING	Secondary Y-axis	Y	Y
SecondYAxisLabelAlignment	Aligns the label for the secondary Y-axis. You can position the label at the Top, Middle, or Bottom. By default, the label is positioned in the middle.	STRING	Middle	N	N
SecondYAxisFormat	Sets the format for the secondary Y-axis values. You can use this property to determine how the displayed data looks. For example, you can set the number of digits to display after the decimal point.	STRING	0000.0	Y	N

Property Table

Property Name	Description	Base Type	Default Value	Bindable	Localizable
SampleSize	Species the number of data points to display on the chart.	NUMBER	n/a	N	N
ShowZoomButtons	Shows zoom in and out buttons on the chart toolbar when horizontal or vertical zoom is enabled.	BOOLEAN	False	N	N
EmptyChartIcon	Specifies the icon to display when the chart is empty.	Media Entity	not visible	N	N
EmptyChartLabel	Specifies the text to display when the chart is empty.	STRING	[[ChartStateLabelEmpty]]	N	Y
ErrorStateIcon	Specifies the icon to display when the chart is empty.	Media Entity	error	N	N
ErrorStateLabel	Specifies the text to display when the chart is empty.	STRING		N	Y
LoadingIcon	Specifies the icon to display when the chart data is loading.	Media Entity	chart loading icon	N	N
NoDataSourceIcon	Specifies the icon to display when the chart is not bound to a data source.	Media Entity	bind	N	N
NoDataSourceLabel	Specifies the text to display when the chart is not bound to a data source.	STRING	[[ChartStateLabelNoData]]	N	Y

The properties of the Waterfall Chart widget are listed below.

Property Name

Description

Base Type

Default Value

Bindable? (Y/N)

Localizable? (Y/N)

CustomClass

The user defined CSS class to apply to the top div of the widget.

Multiple classes can be entered, separated by space.

STRING

n/a

Data

The infotable data source for the chart.

INFOTABLE

n/a

DataField1 — DataField24

These properties are listed when you set NumberOfSeries to a fixed number. You can use these properties to select the infotable column to use for each data series.

Infotable Column

n/a

DataLabel1 — DataLabel24

These properties are listed when you set NumberOfSeries to a fixed number. This property sets the label text that is displayed in the legends area for the respective data series.

STRING

n/a

DataSeriesStyle

Opens the state formatting configuration dialog box. This property appears when NumberOfSeries is set to Auto. The state definition is applied to all series on the chart. You can style the series based on data values to spot trends and patterns more easily.

State Definition

n/a

DataSeriesStyle1 — DataSereisStyle24

These properties are listed based on the number that you set for the NumberOfSeries property. You can use these properties to apply a separate state definition to each data series on the chart.

State Definition

n/a

Disabled

Disables the widget in the mashup.

The widget is displayed in the mashup but you cannot click or select it.

BOOLEAN

False

DirectSelectionZoom

Allows you to zoom in by selecting two data items on the chart.

The options that are available to you for this property are Horizontal Axis, Vertical Axis, Both, and None.

This property appears on the properties list when you select HorizontalZoom

STRING

None

DragSelectionZoom

Allows you to zoom in to a specific part of the chart by drawing a selection box around the data range that you want to view.

The options that are available to you for this property are Horizontal Axis, Vertical Axis, Both, and None.

This property appears on the properties list when you select HorizontalZoom

STRING

None

ExternalPadding

Sets the padding from the axes.

Padding value is a percentage of the bar width.

NUMBER

HideConnectorLines

Hides the connector lines used to highlight the change between each value in the data sequence.

BOOLEAN

False

HideDataTooltips

Hides tooltips that are displayed on hovering or selecting a data point on the chart.

BOOLEAN

False

HideLegend

Hides the legend area.

When you select this property, the LegendAlignment, LegendFilter, LegendMarkerShapes, LegendMaxWidth, and LegendPosition properties do not appear on the properties list.

BOOLEAN

False

HideNotes

Hides the notes area.

When you select this property, the Notes, NotesAlignment, and NotesPosition properties do not appear on the properties list.

BOOLEAN

False

HideXAxis

Hides the X-Axis.

BOOLEAN

False

HideYAxis

Hides the Y-Axis.

BOOLEAN

False

HorizontalAxisLabelsRotation

Sets the rotation angle of labels on the horizontal axis. You can enter a value from — 180 to 180.

NUMBER

Autosize

HorizontalAxisMaxHeight

Sets a maximum height for the horizontal axis.

NUMBER

HorizontalZoom

Allows you to zoom in on the horizontal axis.

When you select this property, the HorizontalRangeZoom, HorizontalSliderZoom, DirectSelectionZoom, and DragSelectionZoom properties appear on the properties list.

BOOLEAN

False

HorizontalRangeZoom

Adds controls that allow you to specify a value range to zoom in on the horizontal axis.

When you select this property, the following HorizontalStartZoomLabel and HorizontalEndZoomLabel properties appear on the properties list.

BOOLEAN

False

HorizontalRangeZoomDateFormat

Sets the date format within the date selection box when using a range selection zoom. The supported formats are based on the Moment.js JavaScript library and are case sensitive.

STRING

n/a

HorizontalRangeZoomDateWidth

Sets the width of the date selection box on the horizontal axis when zooming is enabled.

NUMBER

332px

HorizontalStartZoomLabel

Specifies the text label for the start of the range selection.

STRING

n/a

HorizontalEndZoomLabel

Specifies the text label for the end of the range selection.

STRING

n/a

HorizontalSliderZoom

Adds a slider control that allows you to display data between a minimum and a maximum value on the horizontal axis.

When you select this property, the HorizontalSliderZoomMaxLabel and HorizontalSliderZoomMinLabel properties appear on the properties list.

BOOLEAN

False

HorizontalSliderZoomMaxLabel

Specifies the label for the maximum value of the slider zoom control.

STRING

n/a

HorizontalSliderZoomMinLabel

Specifies the label for the minimum value of the slider zoom control.

STRING

n/a

InternalPadding

Sets the padding between the series of data.

Padding is a percentage of the bar width.

NUMBER

Label

Displays the label text for the Waterfall Chart.

STRING

Waterfall Chart

LabelType

Selects the label type for the Waterfall Chart as Large Header, Header, Sub-Header, Large Title, Title, Label, Body, or Caption.

STRING

Sub-Header

LabelAlignment

Aligns the label of the Waterfall Chart widget to the Left, Center, or Right.

STRING

Left

LabelPosition

Sets the position of the label at the Top or Bottom.

STRING

Top

LabelReset

Sets the label that is displayed in the reset button for the zooming control.

STRING

Reset

LegendAlignment

Aligns the legend text to the Top, Middle, or Bottom.

The options that are available to you for this property depend on the setting of the LegendPosition property.

STRING

Top

LegendFilter

Adds a legend filter that allows the user to filter the chart at runtime.

BOOLEAN

False

LegendMarkerShapes

Sets the marker shape of the legend as Square, Circle, or None.

STRING

Square

LegendMaxWidth

Sets a maximum width for the legend area.

NUMBER

736

LegendPosition

Sets the position of the legend at the Top, Bottom, Left, or Right.

STRING

Right

NonSelectableData

Uses True or False values from the selectable infotable field to control whether users can click to select data on the chart. Each value within the field applies to all data series on the same row.

BOOLEAN

False

Notes

Specifies the text to display within the notes area on the chart. You can enter a string or select a localization token.

STRING

n/a

NotesAlignment

Aligns the note text to the Left, Right, or Center within the notes area.

STRING

Left

NotesPosition

Sets the position of the notes area at the Top or Bottom.

STRING

Bottom

NumberOfReferenceLines

Sets the number of reference lines to display on the chart.

Reference lines are used to highlight the chart data relative to a specific value. You can add up to 24 lines and configure the label, axis, and value of each line.

For example, when you set a value from 1–24 to this property, corresponding properties ReferenceLine1Label — ReferenceLine24Label and ReferenceLine1Value — ReferenceLine24Value appear on the properties list.

NUMBER

NumberOfSeries

Sets the number of data series to display on the chart.

Automatic setting displays all data series.

NUMBER

Auto

NumberOfYLabels

Sets the number of labels to display on the Y axis.

NUMBER

Auto

Orientation

Specifies the orientation of the chart. You can display the cumulative change along a horizontal or vertical axis.

STRING

Vertical

ResetToDefaultValue

Resets the input for this widget to the default values.

n/a

RulersInFront

Shows the rulers in front of the data values. By default, the rulers are displayed behind the data.

BOOLEAN

False

SeriesClicked

Triggers an event when you click on a data point.

n/a

SelectedData

An infotable that contains the selected data on the chart.

INFOTABLE

n/a

SelectionMode

Controls how many data points a user can select at the same time.

The options are Single, Multiple, and Default.

Choose Multiple to allow a user to select more than one data point.

STRING

Default

ShowHideLegend

Adds a show/hide button that enables you to show or hide the chart legend at run time.

BOOLEAN

False

ShowTotal

Use True or False values under the ShowTotal infotable field to control whether trend values are displayed relative to a full bar or column. When set to True, additions are stacked and subtractions overlap the bar or column using a different color.

BOOLEAN

False

ShowValues

Shows the values labels on the chart.

When you select this property, ValuesPosition property appears on the list.

BOOLEAN

False

ShowXAxisRuler

Shows the X-Axis ruler.

BOOLEAN

False

ShowYAxisRuler

Shows the Y-Axis ruler.

BOOLEAN

False

ShowZeroValueRuler

Shows the zero value ruler.

BOOLEAN

False

ShowZoomButtons

Shows zoom in and out buttons on the chart toolbar when horizontal or vertical zoom is enabled.

BOOLEAN

False

SparkView

Shows a simplified view of the chart visualization. Enable this property to hide labels, legends, and rulers.

BOOLEAN

False

TabSequence

The sequence number of the Waterfall Chart widget when you press the TAB.

NUMBER

n/a

UseTrendColors

Highlights trends using different colors when the chart displays data from one series.

An increase or positive trend in the value is given a green style theme. A decrease or negative trend is given a red style theme.

BOOLEAN

False

ValuesTooltip

Allows you to display a custom tooltip when a data point is selected.

You can show a title, text, data values, and create new lines. Use the following syntax: Add #title# before a string to show a title, #newline# to create a new line, ${<token_name>} to display data from available chart tokens, and ${Data:<infotable_column>} or ${DataSourceN:<infotable_column>} to display values from an infotable column. Add a ${total} token to display the total and enclose the token in #step# to display the total for steps only. For example: #title#Tooltip Title#newline#${label},${total}#newline#${data:Column3}#step#${total} in total#step#.

STRING

WaterfallChartDefaultTooltip

ValuesPosition

Sets the position of the data value labels relative to the chart bars as Outside bar or Overlap bar.

STRING

Outside bar

VerticalAxisMaxWidth

Sets a maximum width for the vertical axis.

NUMBER

VerticalZoom

Allows you to zoom in on the vertical axis.

When you select this property, a VerticalSliderZoom property appears on the properties list.

BOOLEAN

False

VerticalSliderZoom

Adds a slider control that allows you to display data between a minimum and a maximum value on the vertical axis.

When you select this property, the VerticalZoomMaxLabel and VerticalZoomMinLabel properties appear on the properties list.

BOOLEAN

False

VerticalZoomMaxLabel

Specifies the text label for the maximum value of the slider zoom control.

STRING

n/a

VerticalZoomMinLabel

Specifies the text label for the minimum value of the slider zoom control.

STRING

n/a

XAxisField

Infotable field that represents the data for the X-Axis.

INFOTABLE

n/a

XAxisLabel

Displays the text label for the X-Axis.

STRING

X-axis

XAxisLabelAlignment

Aligns the X-Axis label to the Left, Center, or Right.

STRING

Center

YAxisFormat

Sets the format for the Y-Axis values.

STRING

0000.0

YAxisLabel

Displays the text label for the Y-Axis.

STRING

Y-axis

YAxisLabelAlignment

Aligns the Y-Axis label to the Top, Middle, or Bottom.

STRING

Middle

YAxisMaximumValues

Sets the maximum range for the Y-Axis values.

Be default, the range is automatically calculated based on the widget data. The value for this property is ignored if the chart data contains a larger value.

STRING

n/a

YAxisMinimumValues

Sets the minimum range for the Y-Axis values.

By default, the range is automatically calculated based on the widget data. The value for this property is ignored if the chart data contains a smaller value.

STRING

n/a

YAxisValuesFormat

Sets the format for the value labels on the Y-axis.

This property is available when you set ShowValues to True.

STRING

Was this helpful?