To Use Open theTool
1. Click > 
Open theTool. The Analysis dialog box opens.
Open theTool. The Analysis dialog box opens.2. Select a tab:
◦ 
Open—Opens the tool. Enter values for the Stroke (tool)opening height and the Stroke (guide package) height.
Open—Opens the tool. Enter values for the Stroke (tool)opening height and the Stroke (guide package) height.◦ 
Rotate—Rotates the tool. Choose a rotation axis, and then set the offset value and angle of rotation.
Rotate—Rotates the tool. Choose a rotation axis, and then set the offset value and angle of rotation.◦ 
Simulate—Simulates the opening process. Enter values for the Stroke (tool) opening height, the Stroke (guide package) height and a value for the Step Width step increment. Click Simulate to start.
Simulate—Simulates the opening process. Enter values for the Stroke (tool) opening height, the Stroke (guide package) height and a value for the Step Width step increment. Click Simulate to start.◦ 
Models—Classify models by group. Select the models from the dialog box or use the search tool 
. Click 
for the top group, 
for the guiding group, and 
for base group.
Models—Classify models by group. Select the models from the dialog box or use the search tool . Click for the top group, for the guiding group, and for base group.3. To ensure correct movement, label all the parts in a model. By default, parts are labeled according to their center of gravity, as follows:
◦ Top group—All parts that are static relative to the top plate
◦ Hold down group—All moving parts
◦ Base group—All parts that are static relative to the bottom plate
 | To label a component, you must set the Creo Parametric part-level PDX_GROUP_LEVEL string parameter to TOP, GUIDE, or BASE. |