To Use Transfer Functionality
To use transfer functionality in the Plate Wizard, an assembled strip with a module definition is required. To toggle the visibility of strip modules, click Show Strip Modules.
1. To use Transfer to copy plates:
a. Select one or more plates.
b. Click > or press CTRL+C to copy the plate definition.
c. Click > or press CTRL+V to paste the plates. The Paste dialog box opens.
d. Click Transfer.
e. Select Strip Module number.
f. Select the Fit to Module check box in case the width of the plates needs to be adjusted.
2. To use Transfer to move plates:
a. Select one or more plates.
b. Click > or press CTRL+C to copy the plate definition.
c. Click > to move the plates. The Move dialog box opens.
d. Click Transfer.
e. Select Strip Module number.
f. Select the Fit to Module check box if the width of the plates needs to be adjusted.