To Assign Material Properties
1. Click > > 
Assign Material Properties. The Material Properties dialog box opens.
Assign Material Properties. The Material Properties dialog box opens.2. Select a type of material from the list:
◦ Material—assigns a material
◦ Bend table—assigns a bend table
3. Enter a value:
◦ Y Factor—sets the Y bend factor
◦ K Factor—sets the K bend factor
4. Click Apply to regenerate the model and apply the changes you have made or click OK to accept the changes and close the dialog box.
 | To change the Y or K bend factor in the article reference by inheritance, the sheetmetal parameters SMT_PART_BEND_TABLE and SMT_PART_BEND_ALLOWANCE_FACTOR are inserted as varied items. |