Measurement set (UPDM - NAF aliases)
Creation
To create a Measurement Set:
• From an
Architectural Description or
Service Description: right-click the Architectural Description or Service Description, point to New, point to NAF, point to All, and then click Measurement Set.
• From an
NAV-3 Measurement Definition: click the Measurement Set button, and then click in free space on the diagram.
Measurement Set button, and then click in free space on the diagram.Appearance
When shown on an
NAV-3 Measurement Definition, a Measurement Set appears as follows:
Relationships
The following relationships are of importance to a Measurement Set:
• UML Generalizations define Measurement Set inheritance (
NAV-3 Measurement Definition).
• Link a Measurement Set to Actual Property Set elements that specify values: right-click the Measurement Set, point to Links, and then click Actual Property Set
The following sections provide information about how a Measurement Set is used in the model.
Create a Measurement Set from
Create from a Measurement Set
In addition to the UPDM elements that can be created from all UPDM elements (
Alias,
Definition,
Information and
Metadata):
Shown on these diagrams, tables and matrices
In addition to the
NAV-2 Integrated Dictionary and
NTV-1 Standards Profile, which can show all UPDM elements:
UPDM writeable properties
The following writeable properties are available on the Measurement Set tab of a Measurement Set element's Property Pages:
• URI