ReverseOnStartupEnabled configuration parameter (TDK)
Syntax (prefix with dash in a Generation Settings Scheme):
ReverseOnStartupEnabled=0 or 1
The ReverseOnStartupEnabled configuration parameter selects or clears the Reverse on Startup check box on the ACS/TDK Settings dialog - 0 is disabled, 1 is enabled.
You can use the FlagsSettingDisabled configuration parameter to make the Reverse on Startup check box read-only after setting it through the ReverseOnStartupEnabled configuration parameter.
 |
ReverseOnStartupEnabled=0
ReverseOnStartupEnabled=1
|