Interacting with the Heart Monitor C simulation
1. From the Heart Monitor's user interface, click the Power button to start the system.
The Lamp on the Power button is on. The pulse is displayed on the Heart Beat display. The intensity of the pulse is indicated by the Intensity LEDs and Meter.
2. Simulate an increased heart rate by moving the Rate Adjust slider to the right.
The Actual Rate value increases accordingly and the rate of the pulses displayed on the Heart Beat display increases.
3. Move the Gain slider to the top, so that the intensity of the pulses increases.
The Intensity LEDs and Meter indicate that the intensity of the pulses has increased.
4. Click the Power button to stop the system.
The Lamp on the Power button is off.
5. Close the Heart Monitor application.
The state machine is removed from the memory of your computer.