Reconnect to configuration management > store CM tool paths globally in model command (CM tool integration)
This command reconnects a Package (or Model) and its descendent Packages to their associated files in a CM tool project.
This command appears on the context menu when you right-click a Model or Package, point to Tools > Configuration Management, and then point to Advanced.
You use this command when Packages have been disconnected from configuration control, and you now want to restore the association that has been broken. Typically you do not use this command, but you may do so under the following circumstances:
• The CM tool Model has been moved to a different folder or computer and the Modeler to CM tool link has been broken. Under these circumstances, you may have to fix the link through the following steps:
◦ Disconnect and Reconnect using the 'Configuration Management > Advanced > Disconnect From Configuration Management' command followed by the 'Configuration Management > Advanced > Reconnect to Configuration Management > Store CM Tool Paths Globally in Model' command.
◦ Check out the Model and all its Packages.
◦ Disconnect and Reconnect using the 'Configuration Management > Advanced > Disconnect From Configuration Management' command followed by the 'Configuration Management > Advanced > Reconnect to Configuration Management > Store CM Tool Paths Globally in Model' command.
◦ Check in the Model and all its Packages.
• The links between the Modeler Model and its associated CM tool Model have been corrupted. Under these circumstances you may be able to fix the link through the preceding steps.
• To use this command you must be a Database Administrator.
• Only those descendent Packages that are stored in the selected CM tool model are reconnected. If your Model contains Packages from different CM tool projects, you must run the Reconnect to Configuration Management > Store CM Tool Paths Globally in Model command for each CM tool project in turn.
• To use this command you require a Modeler license and a CM Integration license. In addition, this command is not available when the CM tool integration is disabled - you can enable and disable the CM tool integration through the Enable Configuration Management Integration check box for the General entry on the Tool Options dialog.
