Plots > Polar Plots > Example: Using Polar Plots to Plot Data
  
Example: Using Polar Plots to Plot Data
1. Define the following data sets:
Click to copy this expression
Click to copy this expression
2. Use an XY Plot to graph and visualize the data:
Click to copy this expression
* 
The plot shows symmetry around the 13th data point.
3. Plot the same data using a polar plot:
Click to copy this expression
* 
The symmetry is lost. You need to normalize the range so that the data is plotted over one cycle of the polar plot.
4. Convert the range (rng) to angles (angs) that are evenly spread over one cycle of the polar plot.
Click to copy this expression
* 
The angles are defined in radians. You can convert the radians to degrees by inserting the unit into the placeholder.
Click to copy this expression
Click to copy this expression
5. Plot the modified vectors:
Click to copy this expression
6. To connect the last data point to the first, add the first data point to the end of the two data sets:
Click to copy this expression
Click to copy this expression
7. Plot the modified vectors:
Click to copy this expression
Now the data set is plotted over one cycle and all the points are connected. Note that in PTC Mathcad, the angles are displayed in a counter clockwise fashion.