Fit Elements
The FIT ELEMENTS command fits selected elements or the whole drawing into the page (drawing area) or into a specified frame. The elements are scaled to fit within the page or frame—with or without an empty border between the outermost elements and the page or frame edge.
If the FIT ELEMENTS command executes without parameters, the Fit elements dialog box opens ( > > ).
FIT ELEMENTSPAGEBOX rectangleLEFTMEDIUMRIGHTTOPMIDDLEBOTTOMborder
Parameters:
PAGE | BOX rectangle
Selects whether elements are fit into the page (drawing area) or into a BOX element. If BOX is set, use four rectangle parameters to describe the BOX element:lower_left_xlower_left_yupper_right_xupper_right_y.
LEFT | MEDIUM | RIGHT
Horizontally aligns the selected elements or all elements LEFT, MEDIUM, or RIGHT.
TOP | MIDDLE | BOTTOM
Vertically aligns the selected elements or all elements to the TOP, MIDDLE, or BOTTOM.
border
Specifies the distance (in millimeters) from the edge the elements are to be fitted in. If you fit elements to the PAGE, the distance is relative to the drawing area edge. If you fit elements to a BOX rectangle, the distance is relative to the BOX element edge.
Fit Elements
Fit Elements page medium middle 100
Fit Elements page left top
Fit Elements page right bottom 50.5
Fit Elements box 1 1 100 100 right bottom 1
Fit elements box 10.606 91.855 144.956 414.372 left top 2