Shear Selection
Applies to Arbortext IsoDraw 7.0 F000 and later:
Use the SHEAR SELECTION command to shear the selected elements and/or patterns.
SHEAR SELECTIONref_xref_yshear_hshear_vCOPYNO_ELEMENTSNO_PATTERNS
ref_x, ref_y
Reference point for shearing.
shear_h
(float) Shear factor in the horizontal direction.
shear_v
(float) Shear factor in the vertical direction.
COPY
(optional) Copies selected elements before shearing.
NO_ELEMENTS
(optional) Excludes elements from shearing.
NO_PATTERNS
(optional) Excludes patterns from shearing.
SHEAR SELECTION 225.2 533.45 15 30 COPY NO_PATTERNS