Removing Arbortext IsoView
You can remove (uninstall) Arbortext IsoView software from your computer in either of the following ways:
• Run the installation program, IsoViewX73.exe. If the program detects Arbortext IsoView software on your computer, you will have the option to uninstall it.
• Use the Windows Control Panel. Select Arbortext IsoView from the list of installed programs, and then select the command or option to change/remove it. (This removal method varies depending on your Windows operating system. See Windows Help for instructions.)
After performing either action above, follow the instructions below to remove Arbortext IsoView software.
|
|
Arbortext IsoView 7.0 M010 or later software is automatically updated and replaced when you install Arbortext IsoView 7.3. However, Arbortext IsoView 7.0 F000 or earlier is not. If you do not uninstall Arbortext IsoView 7.0 F000 or earlier before you install Arbortext IsoView 7.3, the 7.0 F000 or earlier software remains on disk but will not run after you install 7.3.
|
1. When you see the Do you want to completely remove this application... message box, click Yes.
Removal begins. The Setup Status page displays a progress bar along with the message The InstallShield Wizard is removingArbortext IsoView.
2. When removal is complete, the Uninstall Complete page appears. Arbortext IsoView software is now removed from your computer.
3. Click Finish to exit the installation program.
4. If you want to (re)install Arbortext IsoView 7.3, run the installation program, IsoViewX73.exe, again.
