About Ejector Pins
Use an ejector pin to push the cold plastic part out of the cavity insert when the mold base is opened.
The placement of the ejector pins can be specified using datum points in the reference model.
If no reference model exists, the placement references for ejector pins can be defined in the core model of the Creo Expert Moldbase Extension assembly.
Click > and click one of the following commands:
• 
Ejector Pin Designer—Define Ejector Pins dynamically
Ejector Pin Designer—Define Ejector Pins dynamically• 
Ejector Pin—Defines a new ejector pin.
Ejector Pin—Defines a new ejector pin.• 
Update existing Ejector Pins—Updates existing ejector pins in case reference distance has changed.
Update existing Ejector Pins—Updates existing ejector pins in case reference distance has changed.• 
Delete all Ejector Pins—Deletes all ejector pins in the current assembly.
Delete all Ejector Pins—Deletes all ejector pins in the current assembly.• 
Trim Ejector Pin Heads—Trims ejector pin heads against each other.
Trim Ejector Pin Heads—Trims ejector pin heads against each other.• 
Identify ejector pin owner models —Prepares the selected parts for predefining ejectors with layout curve
Identify ejector pin owner models —Prepares the selected parts for predefining ejectors with layout curve• Add Ejector Bores—Checks and adds the cutouts for every assembled ejector pin if these are not present.
• In Drawing Mode Only: 
Add drawing symbols—Places drawing symbols on all ejector pin cutouts in the drawing model. Add notes to the drawing to see the ejector ID.
Add drawing symbols—Places drawing symbols on all ejector pin cutouts in the drawing model. Add notes to the drawing to see the ejector ID. | • You can use Trim to quilt/refmodel on all ejector pin types. To define the quilts, click > > or > > . ◦ If a trim surface is defined then Creo Expert Moldbase Extension uses the  Solidify feature to create the trimmed surface.◦ If no trim surface is defined then Creo Expert Moldbase Extension trims the ejector pin against the solid using the Mold Design  Trim to Geometry.• When you use an ejector pin as a core pin, you must assemble a different hole type to the extracts. Select these hole types from a list of fixed rotation hole types. |