To Set Assembly References
1. Click > > to open the Component Editor dialog box.
2. Click Assembly References.
3. Click a line to activate the assembly reference.
4. Set default constraint set values:
◦ ![](../EMX/images/ref_ap_face_o.png)
—Axis or point, datum plane, and orient plane.
◦ ![](../EMX/images/ref_ap_face.png)
—Axis or point and datum plane.
◦ ![](../EMX/images/ref_cap_face.png)
—Axis or point, or curve and datum plane.
◦ ![](../EMX/images/ref_cap_face_o.png)
—Axis or point on curve, datum plane, and orient plane.
◦ ![](../EMX/images/ref_csys.png)
—Coordinate system.
◦ ![](../EMX/images/ref_three_face.png)
—Datum plane.
◦ ![](../EMX/images/get_id.png)
—Prints the internal
Creo Parametric identifiers of the selected geometry. This ID is used to identify the component assembly reference.
5. Click
![](../EMX/images/plus.png)
to add a new constraint to the list using the current edit area values, or click
![](../EMX/images/minus.png)
to remove the active constraint.