Creo Expert Moldbase Extension > Creo Expert Moldbase Extension Projects > To Create a New Project
  
To Create a New Project
1. Click EMX > Create New or in Manufacturing mode click EMX Manufacturing Mode > Create New. The Project dialog box opens.
2. Under Data, provide information or accept defaults for the following:
◦ Project Name—Enter a name for the assembly, associated drawings, and reports.
◦ Prefix—Enter a wildcard character.
◦ Postfix—Enter a wildcard character.
◦ User Name
◦ Date
◦ Note—
Add notes about the project
3. Under Options set the unit of measurement to mm or inch.
4. Under Templates, click to browse to the template directory. Select a previously designed EMX assembly or accept the EMX default template. If you do not use the EMX default template, then the files for the previously designed EMX assembly, are copied to the current working directory and are then renamed with the new project name, prefix, and suffix. If you use an EMX default template, select the Copy Drawings check box to create a drawing and select the Copy Reports check box to create a report.
5. In the Project Parameter area, select Add local project parameters to create a set of project-specific parameters for the new project. To enter or change a parameter value, double-click in the Default Value column for the parameter and type the value.
* 
When you set the Creo Expert Moldbase Extension configuration option SAVE_LOCAL_PARAM_IN_ASM to YES, the project parameters are stored with the assembly. If you do not set the option to YES, they are written to an ASCII file in the current working directory.
6. Click OK to create the new assembly and report or drawing in the working directory or click Cancel.