|
Element
|
Status
|
|---|---|
|
PRO_E_HLE_TYPE_NEW
|
Mandatory
|
|
PRO_E_HLE_STAN_TYPE
|
Mandatory
|
|
PRO_E_HLE_THRDSERIS
|
Mandatory
|
|
PRO_E_HLE_THRDSERIS
|
Mandatory
|
|
PRO_E_HLE_ADD_THREAD
|
Mandatory
|
|
PRO_E_HLE_ADD_CBORE
|
Mandatory
|
|
PRO_E_HLE_ADD_CSINK
|
Mandatory
|
|
PRO_E_HLE_HOLEDIAM
|
Mandatory
|
|
PRO_E_HLE_DRILLANGLE
|
Required for variable depth hole
|
|
PRO_E_HLE_CSINKANGLE
|
Required for countersink option
|
|
PRO_E_HLE_CBOREDEPTH
|
Required for counterbore option
|
|
PRO_E_HLE_CBOREDIAM
|
Required for counterbore option
|
|
PRO_E_HLE_CSINKDIAM
|
Required for countersink option
|
|
PRO_E_HLE_THRDDEPTH
|
Mandatory
|
|
PRO_E_HLE_DRILLDEPTH
|
Mandatory
|
|
PRO_E_HLE_TAPERED_STRT_DEPTH_OPT
|
It is an option for different straight drill depth types of type ProHleTaperStrDepType. The valid values are:
• PRO_HOLE_NONE_DEPTH_TYPE
• PRO_HOLE_BLIND_DEPTH_TYPE—blind
• PRO_HOLE_THRUNEXT_DEPTH_TYPE—through next
• PRO_HOLE_THRUALL_DEPTH_TYPE—through all
• PRO_HOLE_THRUNTIL_DEPTH_TYPE—through until
• PRO_HOLE_TOREF_DEPTH_TYPE—upto reference
|
|
PRO_E_HLE_ADD_TAPERED_TIP_ANGLE
|
It is an option for tapered tip of type ProHleAddTaperedTipAngFlag. The valid values are:
• PRO_HLE_NO_TAPERED_TIP_ANGL—No tip angle in the tapered hole.
• PRO_HLE_ADD_TAPERED_TIP_ANGLE—Add tip angle in the tapered hole.
|
|
PRO_E_HLE_TAPERED_STRT_DIA
|
Stores taper straight hole diameter double value.
|
|
PRO_E_HLE_TAPERED_STRT_DEPTH
|
Stores taper straight hole depth double value. Available for tapered hole, with blind depth option, that is
• PRO_E_HLE_STAN_TYPE==PRO_HLE_TAPERED_TYPE
• PRO_E_HLE_TAPERED_STRT_DEPTH_OPT==HOLE_BLIND_DEPTH_TYPE
|
|
PRO_E_HLE_TAPERED_TIP_ANGLE
|
Stores tapered tip angle double value. Available for tapered tip option, that is
• PRO_E_HLE_ADD_TAPERED_TIP_ANGLE==PRO_HLE_ADD_TAPERED_TIP_ANGLE
|
|
PRO_E_HLE_CRDIR_FLIP
|
Mandatory
|
|
PRO_E_HLE_ADD_EXIT_CSINK
|
Required for Thru all hole
|
|
PRO_E_HLE_EXIT_CSINKANGLE
|
Required for exit countersink option
|
|
PRO_E_HLE_EXIT_CSINKDIAM
|
Required for exit countersink option
|
|
PRO_E_HLE_ADD_NOTE
|
Required for Hole note
|
|
PRO_E_HOLE_NOTE
|
Depends on PRO_E_HLE_ADD_NOTE
|
|
PRO_E_HLE_TOP_CLEARANCE
|
Mandatory
|
|
PRO_E_HLE_THRDTOSEL
|
Stores reference when PRO_E_HLE_THRD_DEPTH==PRO_HLE_TO_SELECTED_THREAD
|