Bend Tables and Dimensions
Bend table functions support reading in or removing bent table data for a sheet metal part or feature in the part.
Sheet metal dimension functions find or set whether or not developed length dimensions are driven.
Functions Introduced:
The function
ProSmtPartBendtableApply() applies the specified bent table to the sheet metal part. The input argument
from_file specifies whether the bend table is to be applied from memory or from the specified file.
The function
ProSmtPartBendtableRemove() removes the specified bend table from the sheet metal part and the part uses the Y Factor.
The function
ProSmtFeatureBendtableApply() applies the specified bent table to the sheet metal part feature. The input argument
from_file specifies whether the bend table is to be applied from memory or from the specified file.
The function
ProSmtFeatureBendtableRemove() sets a sheet metal feature to use the part bend table instead of the feature bend table.
The function
ProSmtFeatureDevldimsGet() returns the developed length dimensions for the specified sheet metal bend or wall feature. It also returns the surfaces whose developed length these dimensions define.
The function
ProSmtDevldimIsDriven() specifies whether a developed length dimension is driven or not. Use the function
ProSmtDevldimDrivenSet() to set a developed length dimension to driven.