Tool Motion — Go Home
The PRO_E_TOOL_MTN element is a member of PRO_E_TOOL_MTN_ARR array and is documented in the header file ProMfgElemToolMtnGoHome.h, and is shown in the following figure.
Figure 186. Element tree for PRO_E_TOOL_MTN element
The following table lists the contents of PRO_E_TOOL_MTN element.
Element ID | Data Type | Description | ||
|---|---|---|---|---|
PRO_E_TOOL_MTN | Compound | Compound element. This element specifies the tool motion definition. | ||
PRO_E_TOOL_MTN_FEED_TYPE | PRO_VALUE_TYPE_INT | Optional element. Specifies the type of feed for the tool motion using the enumerated data type ProToolMtnFeedType. The valid value for this element are: • PRO_TM_FEED_FREE—Specifies a free feed type. Free feed specifies the rate at which the tool moves in the transverse motion, that is, the non-cutting motion. • PRO_TM_FEED_CUT—Specifies a cut feed type. Cut feed specifies the rate at which the tool moves into the workpiece. • PRO_TM_FEED_RETRACT—Specifies a retract feed type. Retract feed specifies the rate at which the tool moves away from the workpiece. • PRO_TM_FEED_EXIT—Specifies an exit feed type. Exit feed specifies the rate at which the tool leaves the workpiece. | ||
PRO_E_TOOL_MTN_TYPE | PRO_VALUE_TYPE_INT | Mandatory element. Specifies the tool motion type . The valid value for this element is PRO_TM_TYPE_GOHOME. The value for this element is defined by ProTmType. | ||
PRO_E_MFG_PARAM_ARR | Array | Mandatory element. Specifies an array of manufacturing parameters. See the Creo NC online help for more information on manufacturing parameters. The element tree for the manufacturing parameter is defined in the header file ProMfgElemParam.h. For more information, refer to the section Manufacturing Parameters for more information on the element tree. | ||
PRO_E_TOOL_MTN_AXIS_REF | PRO_VALUE_TYPE_SELECTION | Specifies the axis selection. This element is optional for 5-axis Creo NC sequences.
|