Exit Along Tool Axis
The element PRO_E_TOOL_MTN is a member of PRO_E_TOOL_MTN_ARR array and is documented in the header file ProMfgElemToolMtnAlongAxisExit.h, and is as shown in the following figure:
The following table describes the elements in the element tree for the approach along tool axis feature.
Element ID | Data Type | Description |
|---|---|---|
PRO_E_TOOL_MTN_TYPE | PRO_VALUE_TYPE_INT | Mandatory element. Species the tool motion type . The valid value for this element is PRO_TM_TYPE_ALONG_AXIS_EXIT. |
PRO_E_TOOL_MTN_FEED_TYPE | PRO_VALUE_TYPE_INT | Optional element. Specifies the type of feed for the tool motion using the enumerated data type ProToolMtnFeedType. The valid value for this element are: • PRO_TM_FEED_FREE—Specifies a free feed type. Free feed specifies the rate at which the tool moves in the transverse motion, that is, the non-cutting motion. • PRO_TM_FEED_CUT—Specifies a cut feed type. Cut feed specifies the rate at which the tool moves into the workpiece. • PRO_TM_FEED_RETRACT—Specifies a retract feed type. Retract feed specifies the rate at which the tool moves away from the workpiece. • PRO_TM_FEED_EXIT—Specifies an exit feed type. Exit feed specifies the rate at which the tool leaves the workpiece. |
PRO_E_MFG_PARAM_ARR | Array | Mandatory element. Specifies an array of manufacturing parameters. The element tree for the manufacturing parameter is defined in the header file ProMfgElemParam.h. For more information, refer to the section Manufacturing Parameters for more information on the element tree. |