User's Guide > Element Trees: Hole > Hole Placement Types > Radial Hole on Plane with Radial Dimensioning
Radial Hole on Plane with Radial Dimensioning
Locating radial holes requires the first reference to be the axis of placement. This axis is a polar placement (r-theta), where r is the radial distance from a plane, and theta is the angle with respect to a plane.
Element ID
Comment/Description
PRO_E_HLE_PRIM_REF
Primary Selection, planar surface/datum plane
PRO_E_HLE_PL_TYPE set to PRO_HLE_PL_TYPE_RAD
PRO_E_HLE_AXIS
Axis for radial hole
PRO_E_HLE_DIM_RAD
Radial distance with regard to PRO_E_HLE_AXIS
PRO_E_HLE_REF_PLANE_1
Reference plane against which angular distance will be measured
PRO_E_HLE_REF_ANG_1
Angular distance with regard to PRO_E_HLE_REF_PLANE_1
Was this helpful?