Edit Chamfer Feature
As a part of the flexible modeling capabilities the Edit Chamfer feature allows you to modify the existing chamfer geometry of an edge chamfer. You can modify the distance (D) from the edge along each surface, the D1 and D2 values, and so on and also the offset distance (O) from the edge along each surface. The ability to switch from chamfer by offset (O) to chamfer by extension (D) will have the same restrictions as in the chamfer feature.
To create the Edit Chamfer feature follow the steps:
1. Identify the chamfer geometry to be modified and its D or O value.
2. Modify the specified chamfer geometry by using Creo+. The application removes the identified chamfer geometry and recreates the chamfered edges with the desired values. The feature IDs of recreated chamfers are updated.