Example 6: Two Planes
The element tree structure of the axis, created using the type as two planes, is as shown in the following figure.
The following table specifies the constraints for the PRO_E_DTMAXIS_CONSTRAINT elements in the element tree for the two planes reference scheme.
Placement Constraint Element | Placement Constraint Member Elements | Valid Value |
|---|---|---|
PRO_E_DTMAXIS_CONSTRAINT (Constraint 1) | PRO_E_DTMAXIS_CONSTR_TYPE | PRO_DTMAXIS_CONSTR_TYPE_THRU |
PRO_E_DTMAXIS_CONSTR_REF | PRO_SURFACE (Planar) | |
PRO_E_DTMAXIS_CONSTRAINT (Constraint 2) | PRO_E_DTMAXIS_CONSTR_TYPE | PRO_DTMAXIS_CONSTR_TYPE_THRU |
PRO_E_DTMAXIS_CONSTR_REF | PRO_SURFACE (Planar) |