Tool Motion — Normal Exit
The element PRO_E_TOOL_MTN is a member of PRO_E_TOOL_MTN_ARR array and is documented in the header file ProMfgElemToolMtnNormExit.h, and is shown in the following figure.
Figure 192. Element tree for PRO_E_TOOL_MTN element
The following table lists the contents of PRO_E_TOOL_MTN element.
Element ID | Data Type | Description | ||
|---|---|---|---|---|
PRO_E_TOOL_MTN | Compound | Compound element. This element specifies the Tool motion definition. | ||
PRO_E_TOOL_MTN_TYPE | PRO_VALUE_TYPE_INT | Mandatory element. Tool motion type . The valid value for this element is PRO_TM_TYPE_NORMAL_EXIT. The value for this element is defined by ProTmType. | ||
PRO_E_TOOL_MTN_FEED_TYPE | PRO_VALUE_TYPE_INT | Optional element. Specifies the type of feed for the tool motion using the enumerated data type ProToolMtnFeedType. The valid value for this element are: • PRO_TM_FEED_FREE—Specifies a free feed type. Free feed specifies the rate at which the tool moves in the transverse motion, that is, the non-cutting motion. • PRO_TM_FEED_CUT—Specifies a cut feed type. Cut feed specifies the rate at which the tool moves into the workpiece. • PRO_TM_FEED_EXIT—Specifies an exit feed type. Exit feed specifies the rate at which the tool leaves the workpiece. | ||
PRO_E_MFG_PARAM_ARR | Array | Mandatory element. Specifies an array of manufacturing parameters. The element EXIT_DISTANCE is used to specify the exit distance. The element tree for the manufacturing parameter is defined in the header file ProMfgElemParam.h. For more information, refer to the section Manufacturing Parameters for more information on the element tree | ||
PRO_E_MFG_APPR_EXIT_DIR | PRO_VALUE_TYPE_INT | Mandatory element. Specifies the direction of orientation for the approach or exit tool motion. The direction of the orientation is defined by the enumerated data type ProTmSideDir in ProMfgOptions.h. The valid values for this element are: • PRO_TM_DIR_RIGHT_SIDE • PRO_TM_DIR_LEFT_SIDE | ||
PRO_E_TOOL_MTN_AXIS_REF | PRO_VALUE_TYPE_SELECTION | Mandatory element. Specifies the axis selection.
|