Creo Schematics 9.0.0.0 Help Center > Design Basics > Drawing > Construction Lines > To Create Offset Construction Lines
To Create Offset Construction Lines
1. Click Geometry. The Geometry tab opens.
2. Click the arrow next to Offset and select an offset construction line from the list.
3. Type a new offset value in the Offset box or accept an existing offset value.
4. Click the point on the sheet to be used as the datum point. A construction line is drawn offset from the point at the set value.
5. To reverse the offset from the last point, right-click and choose Reverse Offset from the shortcut menu.
6. To create further construction lines of the same type, set a new offset distance and click to locate the datum point.