Creo Schematics 9.0.0.0 Help Center > Working with Designs > Terminator Tables > About Creating a Terminator Table CSV File
About Creating a Terminator Table CSV File
The first row of the CSV file sets it to be a terminator table file. The next three rows are the terminator table header rows. The remaining rows set the values for the pin parameters based on the condition criteria. Each value is separated by a comma. The following example is a terminator table in CSV file format.
type,terminator
SET,MATCH,MATCH,MATCH
PIN,CONN,SPOOL,COND
TERM_NAME,MODEL_NAME,WIRE_GAUGE,MATERIAL
mil_14324,conn_A,18,*
mil_14587,conn_B,*,copper
The CSV file above has the following tabular format:
SET
PIN
TERM_NAME
MATCH
CONN
MODEL_NAME
MATCH
SPOOL
WIRE_GAUGE
MATCH
COND
MATERIAL
mil_14324
conn_A
18
*
mil_14587
conn_B
*
copper
* 
The TERM_NAME mil_14324 is set for pins when the MODEL_NAME is conn_A and the WIRE_GAUGE is 18, the MATERIAL is not important. For all other WIRE_GAUGE values where the MODEL_NAME is conn_B and the MATERIAL is copper, the TERM_NAME mil_14587 is applied.
Use an asterisk (*) to indicate not to check the condition or to specify as a wildcard (for example CONN*).