Routing 3D harness
Note this section assumes you understand how to use PTC Creo Cabling Design.
1. Locate the Creo_Models directory under the basic tutorial directory which is located in the PTC Creo Schematics loadpoint\Creoschematics directory.
2. Select the Creo_Models directory, right-click and choose Copy.
3. Select your working directory, right-click, and choose Paste.
4. Launch PTC Creo Parametric.
5. Open Cabling.asm.
6. Click Applications and choose Cabling.
7. Click Harness and choose 3D.
8. Import the *.xml that was generated from PTC Creo Schematics.
9. Auto Designate all the components.
10. Route the wires and cable.
11. Compare the logical information to ensure all the routing has been completed.