To Route Conductors
1. In the Circuit diagram, click the arrow next to 
and click one of the following commands:
and click one of the following commands:◦ Select Circuit—Select a fiber in the Circuit diagram or type a circuit_id value in the box.
Select Circuit—Select a fiber in the Circuit diagram or type a circuit_id value in the box.◦ 
Select Circuit from Report—The Select a Circuit Fiber dialog box opens. Select a line in the report and click OK.
Select Circuit from Report—The Select a Circuit Fiber dialog box opens. Select a line in the report and click OK.The Wiring diagram displays in the graphics window.
2. Choose one of the following commands:
◦ 
Route Wire—Opens the Catalog Selector dialog box to select a wire.
Route Wire—Opens the Catalog Selector dialog box to select a wire.◦ 
Route Cable—Opens the Catalog Selector dialog box to select a cable.
Route Cable—Opens the Catalog Selector dialog box to select a cable.◦ 
Follow Wire—Prompts to select a wire to follow, a start port, and an end port.
Follow Wire—Prompts to select a wire to follow, a start port, and an end port.The wiring components and ports that are connected in the CID by the selected circuit_id highlight in the graphics window.
3. Select a wire or a cable and click OK.
4. Select a start port and an end port in the Wiring diagram.
5. Continue routing all fibers for the selected circuit in the Wiring diagram.