To Edit a Fibershape
1. In the Catalog Explorer, select the fibershape to edit.
2. Right-click and select 
Shape Properties. The Fiber Properties dialog box opens.
Shape Properties. The Fiber Properties dialog box opens.3. To set the fiber as directional, click the Has direction check box.
4. Click Shape.
5. To select a new Line type, click the arrow to show a list of lines.
6. Select a line type from the list and click OK.
7. Select a different Layer from the list if required.
8. Click 
Port to change the default fiber end port. The Catalog Selector dialog box opens.
Port to change the default fiber end port. The Catalog Selector dialog box opens.
 |
You can only change the default port at the end of the fiber when the fiber has no instances.
|
9. Select a port from the list and click OK.
10. Type the number of a point function (0-34) in the Point function box to set the physical appearance of a point on the line.
11. Type a number in the Pitch box to set spacing between line segments in millimeter.
12. Type a number in the Width box to set a new line width in millimeters.
13. Click the color button to change the line color. The Select a Color dialog box opens. Select the color and click OK or click Edit to create a custom color in the Define Color dialog box.
14. When you edit the shape of an instance of a directional fiber you can display directional arrows:
15. Select an arrow Type from the list.
16. Select a Pattern from the list.
17. Type a number in the Spacing box to set the space between the arrows.
18. Click the Cross reference shape check box to designate the fiber as a cross-referenced shape.