Creo Tutorials > Topology Optimization Tutorials > Beginners Tutorials > Setting Up and Running the Optimization Study
Setting Up and Running the Optimization Study
Set Up the Optimization Study
1. Click Home > Optimization Study. The Optimization Study Setup dialog box opens.
2. From the Topology regions, Design objectives, and Design constraints boxes, select the topology region, design objective, and constraint that you created.
Run the Optimization Study
1. In the Optimization Study Setup dialog box, click Run. The Optimization Status window opens, where you can watch the status of the run. The study runs one cycle at a time, up to the maximum number of cycles that you define. When an optimization study runs successfully, Show Results appears in the Optimization Status window.
2. Click Show Results. The Results tab opens, displaying the study results.