You can use the Swept Blend tool to create a sheet metal wall or surface with swept blend geometry. When a swept blend wall is not the first wall, use the tool to create a solid cut. You create swept blend geometry by sketching a single trajectory and multiple sections that are blended at specified segment vertices or at datum points on the trajectory. You can orient a section by specifying the rotation angle about the z-axis.

You can redefine a swept blend wall as a surface, or redefine a swept blend surface as a wall, if the wall is not the first one in a design. You must specify thickness for a first wall. Keep in mind that additional options specific to Sheetmetal Design are available for the Swept Blend tool.

For more information on the Swept Blend tool, search the Help Center.