Sheetmetal > Preparing for Manufacture > Reports > To Access HTML Reports
  
To Access HTML Reports
1. To show information in HTML format, ensure that the info_output_format configuration option is set to html. The default is html.
2. Click Tools > Model > Model. The sheet metal part information is displayed in the browser.
3. Click the required report. You can access the following type of reports:
Used K and Y Factors by Part—Lists all values of the K- and Y-factors that are used by the part or features and the type of factor assigned to it. The type of factor can be either Part Assignment or Feature Specific.
Bend Tables Associated with Part—Lists detailed information about bend tables used in the part.
Bends Containing Feature Bend Table—Lists the assigned bend tables used by the features.
Bends Allowance—Lists information of bends assigned to a feature with or without a 90 degree bend angle. The modified bend allowance value is displayed with an associated tag named manually. This value does not use an equation.
Bend Radii—Lists detailed information about the bend radii of features.
Design Rule Violations Check—Lists detailed information about how your design complies with your defined design rules. The report lists any violations in the model. The report provides information about the design rule name, design rule formula, required rule value, current rule value, and the reference IDs of features that violate design rules defined for the bend table. To obtain this report, you must first define a rule table (Design Rules) and assign it to your sheet metal part. A design check is performed only for planar walls.