To Change Feed Rate at Some Point Along the Tool Path
1. Select an NC Sequence. The SMT NC SEQUENCE dialog box opens.
2. Click CL Command and click Define. The SMM CL COMMAND dialog box opens.
3. Click a command and use
to place the CL command at the select point of the tool path, or use
to place the CL command at the beginning of the tool path, or use
to place the CL command at the end of the tool path.
4. Select Movement in the Command Wizard window.
5. Select FEDRAT /.
6. Specify the required value for feed ratio.
7. Click Done.
System-Supplied Syntax Menus
Sheet Metal Manufacturing provides two sets of system-supplied menu structures: ISO and AI. ISO is the default. If you want to use the AI menu structure, use the configuration option:
pro_mfg_cmdsyn_dir creo/mfg_cmdsyn_ai
where creo is the Creo Parametric loadpoint on your system.
Defining Your Own Syntax Menus
You can replace the system-supplied syntax menu structure (used to add lines in editor) with your own.
The default directory for syntax menu files can be specified using the config.pro option pro_mfg_cmdsyn_dir. Sheet Metal Manufacturing will look for the syntax files in the following order:
1. in the current directory,
2. in the default directory, if it is set, and
3. in the system directory.
The system directory for the .syn files is creo/mfg_cmdsyn, where creo is the Creo Parametric loadpoint.