Piping > Setting Up Piping Library > Non Spec-Driven Parameters > To Assign the Default Corner Type for New Line Segments
  
To Assign the Default Corner Type for New Line Segments
1. Do one of the following:
Click Route Pipe and select the pipeline to route in the Model Tree.
Click Create Pipe and create a new pipeline. Create a new line stock or select an existing one from the list.
The Rigid Pipes group is available.
2. Click Environment. The Piping Environment dialog box opens.
3. Choose a Corner Type option from the list:
Fitting—Creates sharp corners so that you may later add corner fittings. Fitted corners create breaks in a pipeline.
Bend—Creates each corner by bending the pipe. Select a Bend Radius or type a new one.
Miter—Creates a corner by adding a miter cut. Select a Cut Number from the list or type a new number to specify the number of miter cuts. Select a Cut Length from the list or type a new number to specify the length of the cut.
4. Click OK or continue to configure additional options.