Example: Clocking Angle
The following is an example of how to show the clocking angle value in a 3D note.
1. Create an evaluate feature for clock angle in Piping mode.
2. Create an assembly parameter, clockangle, that is driven by the following relation:
clockangle = clk_ang:fid_30:57
where
30 is the evaluate ID
57 is the session ID
3. Create a 3D note in the assembly and type “The clock angle is &clockangle” as the text of the note.
The 3D note is displayed as “The clock angle is XXX”, where XXX is the value of the assembly parameter, clockangle