Piping > Manufacturing > Piping Information in Non Spec-Driven Piping > Clocking Angle Information > Example: Clocking Angle
Example: Clocking Angle
This is an example of how to show this value in a 3-D note:
1. Create a clock angle feature in piping mode.
2. Create an assembly parameter, clockangle, that is driven by the following relation:
clockangle = clk_ang:fid_30:57
30 is the evaluate_ID
57 is the session_ID
3. Create an assembly 3-D bend note: The clock angle is &clockangle.
A seg_name feature parameter is created in the evaluate feature to identify its parent segment. Upon regeneration, the system updates an evaluate feature for a particular segment of pipe to a new value if the segment changes.
You can redefine the feature by clicking Clocking Angle under Info Type and under Definition, clicking Segment in the Report Pipeline dialog box.