Piping > Design Rule Checking and Piping (Report) Information > Spec-Driven Pipeline Reporting > Spec-Driven Designatable Pipe Reporting > About Bend Location Information
About Bend Location Information
The location at which the pipe is bent is the bend location of that pipe. A Bend Location report generates a table of information about the bend number, the bend vertex (x, y, z) in the specified coordinate system, bend angle, and bend radius. The bends are numbered in the report starting from the specified pipe end.
For a Bend Location report:
The pipeline must have at least one bend.
The segments in a selected pipeline should have a minimum angle of 1.5°.
* Bend Location information is available for all pipelines with bends. It is also available for pipelines with a combination of bends and miter cuts.