Accept Default Direction
|
Optional Direction Arrow
|
You must accept this direction so the Rib feature is filling an enclosed area.
|
You can choose either direction because both options fill an enclosed area.
|
Side One (one side)
|
Side Two (one side)
|
Both Sides (symmetrical)
|
Material Side Change | How to Set the New Material Side |
Both sides - to - Side one or Side two | Do one of the following while defining or redefining: • Right-click the Rib feature in the graphics window and clear Symmetric on the shortcut menu. • Click on the Profile Rib tab. |
Side one or Side two - to - Both sides | Do one of the following while defining or redefining: • Right-click the Rib feature in the graphics window and click Symmetric on the shortcut menu. • Click on the Profile Rib tab. |
Side one - to - Side two (and vice versa) | Do one of the following while defining or redefining: • Right-click the Rib feature in the graphics window and click Flip on the shortcut menu. • Drag the preview geometry to the opposite side. • Type a negative value in the dimension box. • Click on the Profile Rib tab. |