Creo ModelCHECK > teacher > PTC Creo ModelCheck Teacher: Layer Checks
  
PTC Creo ModelCheck Teacher: Layer Checks
Layers are a means of grouping items and then performing operations on them as a group such as displaying or blanking, plotting, selecting, and suppressing.
What Creo ModelCHECK does with layers
Report information—Lists all the layers and the number of items on them.
Display status—Checks the display status of the standard named layers. If a layer is found to have the wrong display status, a Set Status button in the layer report will allow for automatic correction of the layer.
Standard items—Checks that layers have the standard items on them. If items are found that are on the wrong layer, or not on any layer when they are supposed to be on a specific one, an Add button in the layer report will allow for automatic movement of items to their proper layers.
Legacy layers—If configured to do so, a Move button in the layer report will allow you to move all items from an old or legacy layer to a new layer. Creo ModelCHECK will then delete the old layer.
The following layers have to be in all your parts:
NAME
DISPLAY STATUS
Standard Items
AXES
BLANK
DATUM_AXIS
CSYS
BLANK
DATUM_CSYS
CURVES
BLANK
DATUM_CURVE
DATUMS
BLANK
DATUM_PLANES
ROUNDS
NONE
ROUND
DRAFT
NORMAL
DRAFT
CHAMFERS
NORMAL
CHAMFER
COSMETICS
NONE
COSMETIC_ALL
For example, the following layers will be replaced with new layers in all your parts:
OLD LAYER
NEW LAYER
DTMS
DATUM_ALL
For example, the following layers have to be in all your assemblies:
NAME
DISPLAY STATUS
Standard Items
DATUMS
BLANK
DATUM_ALL
For example, the following layers will be replaced with new layers in all your parts:
OLD LAYER
NEW LAYER
DTMS
DATUM_ALL