Creo ModelCHECK > Configuring PTC Creo Modelcheck > Setting Up the Check Configuration File > Part Mode Checks
  
Part Mode Checks
Applicable checks and their possible values in Part mode follow. Click the check name to see the check definition and suggested settings.
• ACCURACY_INFO (Accuracy Information)
Y/N/E/W
• ADD_CHK_PARAM (Add a Parameter)
Y/N
• AE_GTOL_DUPLICATE (Duplicate Geometric Tolerance Annotation Elements)
Y/N/E/W
• AE_MISSINGREFS (Annotation Elements with Missing References)
Y/N/E/W
• AE_SF_DUPLICATE (Duplicate Surface Finish Annotation Elements)
Y/N/E/W
• AF_INCOMPLETE (Incomplete Annotation Features)
Y/N/E/W
• ANNTN_INACTIVE (Inactive Annotations)
Y/N/E/W
• BURIED_FEAT (Buried Features)
Y/N/E/W
• BURIED_SUSPECT (Buried Features with Children)
Y/N/E/W
• CHAMFER_CHILD (Children of Chamfers)
Y/N/E/W
• CHILD_EXT_FAILED_FEATURES (Children of External Failed Features)
Y/N/E/W
• CHILD_FAILED_FEATURES (Children of Failed Features)
Y/N/E/W
• CHILDREN_EXIST (Standard Children)
Y/N/E/W
• COSMETIC_FEAT (Cosmetic Features)
Y/N
• CYL_CUT_SLOTS (Cuts and Slots That Should Be Holes)
Y/N/E/W
• CYL_DIAMS (Circular Cut Diameters)
Y/N/E/W
• DATUM_RENAME (Renaming Datums)
Y/N/E/W
• DEF_DENSITY (Model Density)
Y/N/E/W
• DEFAULT_CHILD (Children of the Default Datum Planes)
Y/N
• DEPENDENT_FEATURE (Dependent Features)
Y/N/E/W
• DESIGNATED_ATTR (Designated Attributes)
Y/N/E/W
• DRAFT_ANGLES (Standard Draft Angles)
Y/N/E/W
• DRAFT_CHILD (Children of Draft)
Y/N/E/W
• DTM_AXES_INFO (Datum Axis Information)
Y/N
• DTM_CSYS_INFO (Coordinate System Information)
Y/N
• DTM_CURVE_INFO (Datum Curve Information)
Y/N
• DTM_PLANE_INFO (Datum Plane Information)
Y/N
• DTM_POINT_INFO (Datum Point Information)
Y/N
• DUPLICATE_MODELS (Duplicate Models)
Y/N/E/W
• EARLY_CHAMFER (Early Chamfers)
Y/N/E/W
• EARLY_COSMETIC (Early Cosmetic Features)
Y/N/E/W
• EARLY_DRAFT (Early Draft)
Y/N/E/W
• EARLY_ROUND (Early Rounds)
Y/N/E/W
• EDGE_REFERENCES (Features That Reference Edges)
Y/N/E/W
• EXTERNAL_DEPS (External Dependencies)
Y/N/E/W
• EXTRA_LAYERS (Layer Status)
Y/N/E/W
• EXTRA_PARAMS (Parameter Format Errors)
Y/N/E/W
• FAILED_FEATURES (Failed Features)
Y/N/E/W
• FAMILY_INFO (Family Table Information)
Y/N/E/W
• FEATURE_INFO (Feature Information)
Y/N
• FILE_SIZE (File Size)
Y/N
• FLEXIBLE_MODELING_FEATURES (File Size)
Y/N/E/W
• FREEFORM (Freeform Surfaces)
Y/N/E/W
• FT_DEF_VALS (Family Table Default Values)
Y/N/E/W
• FT_STD_PARMS (Family Table Standard Parameters)
Y/N/E/W
• GEOM_CHECKS (Geometry Checks)
Y/N/E/W
• GEOMETRIC_TOL (Geometric Tolerances)
Y/N
• HOLE_DIAMS (Standard Hole Diameters)
Y/N/E/W
• HOLE_LIGHTWT (Lightweight Holes)
Y/N/E/W
• IGNORE_FEAT (Problem Features That Should Be Ignored)
Y/N
• IMPORT_FEAT (Imported Features)
Y/N/E/W
• INCOMPLETE_FEAT (Incomplete Features)
Y/N/E/W
• INSERT_MODE (Insert Mode Left Active)
Y/N/E/W
• INSTANCE_NAME (Instance Name)
Y/N/E/W
• LAYER_DISPSTAT (Layers That Are Set to Display)
Y/N/E/W
• LAYER_DTM_BLANK (Datum Features on Blanked Layers)
Y/N/E/W
• LAYER_EXT_ITEMS (Extra Features on Layers)
Y/N/E/W
• LAYER_INFO (Layer Information)
Y/N
• LAYER_ITEMS (Items on Multiple Layers)
Y/N/E/W
• LAYER_MOVE (Move Items from Old Layers to New Ones and Delete the Old One)
Y/N/E/W
• LAYER_PLACE (Layers Contain Standard Items)
Y/N/E/W
• LAYER_STATUS (Layer Status)
Y/N/E/W
• LAYOUT_INFO (Layout Information)
Y/N/E/W
• LOW_TOLERANCE (Lowest Allowable Tolerance)
Y/N/E/W
• MATERIAL_DENSITY (Material Card Density)
Y/N/E/W
• MATERIAL_INFO (Material Type)
Y/N/E/W
• MEMORY_SPACE (Memory Space Used)
Y/N
• MERGE_FEAT (Merged Features)
Y/N/E/W
• MINMAXTOL_INFO (Minimum and Maximum Tolerances)
Y/N
• MODEL_NAME (Model Name Specification Errors)
Y/N/E/W
• MODEL_NAME_STR (Model Name)
Y/N
• NAMED_FEAT (Named Features)
Y/N
• OVERALL_SIZE (Overall Size)
Y/N
• PARAMCHECK (Parameter Format Errors)
Y/N/E/W
• PARAM_INFO (Model Parameters)
Y/N
• PARAM_NOTE_REQ (Required Parameter Notes)
Y/N/E/W
• PARAM_NOTE_UNACC (Unacceptable Parameter Notes)
Y/N/E/W
• PARAM_RENAME (Parameter Rename)
Y/N/E/W
• PARAM_SPELL (Parameter Spelling)
Y/N/E/W
• PARAM_UNUSED (Unused Parameters)
Y/N/E/W
• PARENT_DIFF (Excessive Number of Parent References)
Y/N/E/W
• PRT_DENSITY ((Model Density)
Y/N/E/W
• PLANE_CHILD (Datum Planes without Children)
Y/N/E/W
• PLANE_PARENT (Datum Planes That Only Have One Parent)
Y/N/E/W
• PRO_VERSION (Version of Creo Parametric)
Y/N/E/W
• RC_INCOMPLETED (RuleCHECK Rules That Are Not Complete)
Y/N/E/W
• REG_FEATURES (Resumed Features)
Y/N
• REGEN_ERRS (Regeneration Errors)
Y/N/E/W
• REGEN_WRNS(Regeneration Warnings)
Y/N/E/W
• REGEN_SREPS (Regenerate Simplified Representations)
Y/N/E/W
• REGEN_XSEC (Regenerate Cross-Sections)
Y/N/E/W
• RELATION_COMM (Comments in Relations)
Y/N/E/W
• RELATION_ERRS (Relation Errors)
Y/N/E/W
• RELATION_INFO (Relation Information)
Y/N/E/W
• RELATION_MISS (Relations That Are Missing)
Y/N/E/W
• RELATION_MULT (Relations That Have Multiple Assignments)
Y/N/E/W
• RELATION_UPDATE (Relations That Need Update)
Y/N/E/W
• RENAMED_SYMBOLS (Renamed Dimension Symbols)
Y/N
• ROUND_CHILD (Children of Rounds)
Y/N/E/W
• RULECHECK_INFO (RuleCHECK Information)
Y/N/E/W
• SEARCH_DUP_MODELS (Search for Duplicate Models)
Y/N/E/W
• SHARP_EDGES (Sharp Edges)
Y/N/E/W
• SHORT_EDGES (Short Edges)
Y/N/E/W
• SHTMTL_BENDTAB (Sheet Metal Bend Tables)
Y/N/E/W
• SHTMTL_FBENDTAB (Features with Assigned Sheet Metal Bend Tables)
Y/N/E/W
• SHTMTL_FLAT (Sheet Metal Flat Patterns or Flat States)
Y/N/E/W
• SHTMTL_THICK (Standard Sheet Metal Wall Thicknesses)
Y/N/E/W
• SHTMTL_UNBENDS (Sheet Metal Unbends)
Y/N/E/W
• SHTMTL_YFACTOR (Sheet Metal Y-Factor)
Y/N
• SIMPREP_INFO (Simplified Representations)
Y/N
• SIMPREP_MASTER (Simprep Master)
Y/N
• SIMPREP_NAME (Simplified Representation Names)
Y/N/E/W
• SKETCH_ITEMS (Number of Entities in a Sketched Feature)
Y/N/E/W
• SLA_INFO (SLA Information)
Y/N/E/W
• SMALL_CYLSRF (Small Cylindrical Surfaces)
Y/N/E/W
• SRF_EDGES (Surface Gaps and Overlaps)
Y/N/E/W
• STARTCHECK (Start Part and Start Assembly Check)
Y/N/E/W
• STD_NOTES_MISSING (Missing Standard Notes)
Y/N/E/W
• SUP_FEATURES (Suppressed Features)
Y/N/E/W
• TEMPLATE_DATUM_PLANES (Datum Plane Check Based on Template Files)
Y/N/E/W
• TEMPLATE_LAYERS (Layer Checks Based on Standard Layers in Template Files)
Y/N/E/W
• UDF_INFO (UDF Information)
Y/N
• UNITS_LENGTH (Length Units)
Y/N/E/W
• UNITS_MASS (Mass Units)
Y/N/E/W
• VIEW_INFO (View Information)
Y/N
• XSEC_INFO (Cross Section Information)
Y/N