Manufacturing > Tooling > Solid Tool Models > Tool Display
Tool Display
If a tool model was used for creating an NC sequence, then whenever you display the path and tool, two additional options will appear:
Disp Model—Use the tool model geometry in CL data display.
No Model—Display the default tool section based on the tool parameter values.
If you have the same manufacturing model displayed in multiple windows, the tool and tool path will update concurrently in all windows if they are modified.
* If the TIP coordinate system is missing in the model, the system will issue an error message and display the default tool. If multiple coordinate systems named TIP are found in the tool model, a warning will be issued; the tool origin will be selected by the same rules as the tool parameters are extracted from a tool assembly (for example, the assembly coordinate system takes precedence).