To Reorder the NC Sequences Created by Auto Drilling
When you apply the drilling methods to the selected holes and click OK, the system redisplays the Auto-Drilling dialog box, and shows all the NC sequences being created as a result of applying the drill methods. For each NC sequence, the system displays the pocket number, the tool name, the cycle type, the sequence name, as well as the minimum diameter and maximum length. You can reorder these NC sequences both automatically and manually.
1. Click Auto Reorder to automatically reorder the NC sequences based on:
a. Process order in UDF
b. Limiting tool changes
If the Consider Orientation checkbox is selected, the system will reorder based on the coordinate system associated with the holes being drilled.
2. To manually reorder the NC sequences, highlight the appropriate row(s), click Cut, then place the cursor in the new location and click Paste.
The system inserts the row(s) immediately above the new cursor location.
3. Click Undo or Redo to roll the reordering changes back or forward.
4. Click OK when finished.