Manufacturing > Milling > Profile Milling > To Edit a Classic Profile Milling NC Sequence
  
To Edit a Classic Profile Milling NC Sequence
1. Right-click the Classic Profile milling sequence in the model tree and click .
2. On the NC SEQUENCE menu that appears, click Seq Setup. The following classic profile milling specific options are available on the SEQ SETUP menu in addition to the common options for all NC sequence types. If required, select the profile milling options for editing.
Surfaces—Select surfaces to mill. If you are selecting quilt surfaces, specify which side of the surfaces you wish to machine.
ScallopSrf—Allows you to select surfaces that will be excluded from scallop computation if SCALLOP_HGT is specified.
Check Surfs—Select additional surfaces against which gouge checking will be performed.
Build Cut—Access the Build Cut functionality.
3. Select additional options, if required, and click Done. Creo NC displays the user interface for all selected options one after the other.
4. On the NC SEQUENCE menu, click Play Path to verify the tool path automatically generated by the system. If required, you can either modify the parameters, or use the Customize functionality to adjust the tool path.
5. Click Done Seq when satisfied.